The re-barreled Colt Police Positive Special and proper handloads.
Picking up where we left off after Special Projects Editor Roy Huntington kindly re-barreled my .32 Colt Police Positive Special, I finally had the chance to handload some of my favorite loads for it. If you remember, the replacement barrel has a thicker front sight on it, so it’s easier for me to see. Because of the thicker front sight, Roy also opened up the fixed rear sight channel for me.
He obviously got things lined up pretty good because the gun shoots to sights with the handloads used.
Bringing an old gun back to life is satisfying. Shooting one is like
stepping into a time machine, as you live in the past by shooting guns of yesteryear.
Nice close-up of the checkered hammer and cylinder latch,
along with Colt’s prancing pony trademark.
Name Only?
When certain manufacturers come out with a new cartridge, competing manufacturers don’t like advertising for the competition, so they stamp their own, or some benign moniker for the cartridge. Examples include Ruger marking .45 Colt revolvers with .45 Caliber. Well, Colt was no different. When the .32 S&W Long came out, Colt went with the .32 Colt New Police for the same cartridge.
All handloads were loaded on Tank’s Lee
Precision Classic Turret Press.
Handload Heaven
The .32 S&W Long is best suited for quicker burning powders such as Red Dot, Winchester 231, and the old standby, Unique. I use two cast bullets suitable for this gun, both weighing just over 100 grains. The first is an RCBS SWC that looks like a baby “Keith” slug. I’ve always had good luck with this bullet, accuracy-wise, when shooting it in my other .32 H&R sixguns.
The other bullet used is from MP Molds, based in Slovenia. It is a radiused flat-nose design, with a hollow point (HP). It, too, has always shown good manners in the accuracy department and is deadly on varmints with the huge HP cavity.
All loads were assembled using my Lee Precision Classic Turret Press and Lee dies. Since the charges were so small, a Lee Auto-Disk Powder Dispenser was used with the Lee Micro Disk (#441523) since the charges.
I was able to drop 3.0 grains of 231 with this disk. For handloading numerous calibers, the Lee Classic Turret is the way to go. With dies pre-set and stored in the die plate, swapping calibers is quick and easy, taking just seconds to accomplish.
When using 3.0 grains of Winchester 231 powder with both bullets’ velocity runs right at 880 FPS from the 4” barrel of the Police Positive Special. With 3.5 grains of Unique, muzzle velocity was almost identical. Friend Glen Fryxell shared his favorite load of 2.6 grains of Red Dot with the RCBS SWC, and it runs at 800 FPS, also shooting very well.
The heavy barrel looks “just right” on the gun.
The serrated, thicker front sight on the replacement
barrel was a welcome addition to the old shooter.
Shooting
As I mentioned earlier, the replacement barrel has a much thicker front sight (.125”) and is much easier to see with my tri-focal corrective lenses. Being transitional lenses there is no distinct line, rather the focal planes blend into each other. All I have to do is find the “sweet” spot where the front sight looks sharp and clear like it did when my eyes were just 20 years old.
From a distance was 50 feet, I had my hands resting on top of a 12” section of 6” x 6” post standing on end with a sandbag perched on top. The raised position allowed my eyes to automatically align with the “sweet” spot of my transitional tri-focal glasses, providing a sharp sight picture.
My targets consisted of 2” florescent orange squares turned ¼ turn, giving them a diamond shape appearance. Using a 6 o’clock hold with the top of the front sight at the bottom of the diamond shape is natural and provides a wonderful sight picture when everything is all lined up. Groups consisted of five shots each.
Not bad for an old, re-barreled gun. The satisfaction of this whole
project was heartwarming and fun. Can it get any better?
Special thanks to “The Fixer” Roy Huntington.
Results
First off, shooting these loads is a pure pleasure. There is no recoil to speak off, yet a 100-grain cast slug traveling in excess of 850 FPS packs enough punch to do some damage. Groups were consistently accurate no matter what bullet or powder was used, running anywhere between 1-1.5” as you can see in the target photos.
Shooting old guns with handloads you made yourself is wonderful therapy for beating boredom or taking a break from the routine of shooting modern guns and loads. It’s just different, in its own pleasing way.
The old barrel and the gun after Roy re-barreled it. He’s handy indeed!
Marvelous Misfits
Also of note is shooting a gun once considered a candidate for the scrap heap. With a little computer research, an even better barrel was obtained, making it more suitable for my eyes than the factory original. Plus, I think the heavier barrel looks better.
By making these changes, along with having a friend doing the work, it adds a personal touch to the gun and makes it seem more yours. Old guns taken from the pile of “misfit toys” (referencing “Rudolph the Red Nosed Reindeer”), and giving them a little care and love, rendering them to shooter status once again, is very satisfying to say the least.
Plus, these “misfits” are usually sold “as is” at bargain prices. So, if you have a little “misfit” in yourself and enjoy making broken guns become shooters again, this is a satisfying and affordable way of keeping yourself occupied until the next project presents itself.
South Carolinian faced 115 years in prison until ATF admitted they got the wrong man
ATF refused to say how the false arrest could have happened. by LEE WILLIAMS
Firearms seized by ATF and South Carolina law enforcement last year during a “major drug and guns crackdown,” which resulted in 20 arrests, including Bryan Montiea Wilson. (Photo courtesy U.S. Attorney’s Office, District of South Carolina.)
Wednesday, December 13, 2023, began just like any other workday for Bryan Montiea Wilson, a 33-year-old resident of West Columbia, South Carolina, who had never been in trouble with the law. At 6 a.m., Wilson began his shift at Harsco Rails on West Technology Drive, where he worked as a material processor for the railroad equipment manufacturer. A couple hours later, Wilson’s supervisor found him on the facility floor and told him to report to the main office. Inside were two men and a woman, all wearing civilian clothes. They told Wilson they were ATF agents and that they had a warrant for his arrest. They never showed him a badge.
Wilson was handcuffed and searched. He did not resist and complied fully with their demands. He told the agents he was diabetic, so they allowed his supervisor to retrieve a Pop-Tart, fruit juice and blood-sugar monitor from his locker. Wilson was walked out of Harsco in handcuffs. All of his coworkers witnessed his arrest. In the parking lot, Wilson saw two more agents searching his car.
On the way to the federal courthouse, the agents allowed Wilson to call his brother, who notified his parents of his arrest. At the courthouse, Wilson was booked, fingerprinted and photographed. He was searched a second time; all of his personal property was seized, and he was locked in a holding cell by himself.
Eventually, a Federal Public Defender was allowed in and showed Wilson a copy of an indictment, which charged him with five counts of possession with intent to distribute a controlled substance and three counts of possession of a firearm in furtherance of a drug trafficking offense.
Wilson faced up to 115 years in a federal penitentiary and more than $17 million in fines. The indictment also sought to forfeit unspecified personal property and money. Wilson had never been arrested in his life. He repeatedly told his lawyer he was innocent and that there had to be some sort of mistake.
Wilson was ushered into a courtroom and arraigned before a U.S. Magistrate Judge, who read the charges off of the indictment. An agent falsely testified that the ATF had Wilson under surveillance for the past 13 months. The agent listed several dates when Wilson allegedly sold drugs to undercover ATF agents. He claimed they had Wilson on tape committing the crimes, and that other codefendants had been arrested as well.
Wilson pleaded not guilty. The judge was willing to schedule a bond, but prosecutors wanted Wilson held for several days instead. After the hearing, Wilson continued to tell his lawyer that there had been a mistake. His family, who were present during the arraignment, said the same thing.
False reports
According to court documents, from November 2022 to March 2023 West Columbia Police Officers Calvin Brown and David Thompson — who were assigned to an ATF task force and supposedly working under ATF supervision — “conducted a series of gun and drug purchases from (among others) someone they identified as Mr. Wilson.”
According to the officers’ reports, the person that the officers bought guns and drugs from and surveilled was listed as “WILSON, BRYAN MONTIEA” or “BRYAN WILSON.” Their reports even listed Wilson’s actual home address. They described him as a black male, 33 years old, five feet, 10-inches tall, with black hair and brown eyes — a description that matches Wilson and a host of other West Columbia residents.
Their reports document numerous undercover purchases of crack cocaine, methamphetamine and numerous firearms from someone they falsely believed was Wilson.
On March 15, 2023, the officers wrote “A CONTROLLED PURCHASE FOR 2 FIREARMS FOR THE PRICE OF $1,900 AND 29 GRAMS OF METHAMPHETAMINE FOR THE PRICE OF $280 FROM THE SUSPECT IDENTIFIED AS BRYAN WILSON WAS CONDUCTED THROUGH THE USE OF CONFIDENTILA (sic) INFORMANTS AND UNDERCOVER OFFICERS.”
On December 5, 2023 — eight days before Wilson’s arrest — a federal grand jury issued an eight-count indictment, alleging Wilson committed the following federal crimes:
Count One: Possessing and distributing crack cocaine on November 10, 2022, in violation of 21 U.S.C. § 841(a)(1) and (b)(1)(C).
Count Two: Possessing and distributing five grams or more of methamphetamine (i.e., “meth”) and crack cocaine on November 18, 2022, in violation of 21 U.S.C. § 841(a)(1), (b)(1)(B) and (b)(1)(C).
Count Three: Possessing and distributing crack cocaine on December 8, 2022, in violation of 21 U.S.C. § 841(a)(1) and (b)(1)(C).
Count Four: Using and carrying a firearm during a drug trafficking crime on December 8, 2022, in violation of 18 U.S.C. § 924(c)(1)(A)(i).
Count Five: Possessing and distributing five grams or more of meth and crack cocaine on January 17, 2023, in violation of 21 U.S.C. § 841(a)(1), (b)(1)(B) and (b)(1)(C).
Count Six: Using and carrying a firearm during a drug trafficking crime on January 17, 2023, in violation of 18 U.S.C. § 924(c)(1)(A)(i).
Count Seven: Possessing and distributing five grams or more of meth on March 13, 2023, in violation of 21 U.S.C. § 841(a)(1) and (b)(1)(B).
Count Eight: Using and carrying a firearm during a drug trafficking crime on March 13, 2023, in violation of 18 U.S.C. § 924(c)(1)(A)(i).
There was just one problem: Bryan Montiea Wilson never sold guns or drugs to ATF agents, their informants or anyone else.
ATF got the wrong man.
Release
Wilson’s Federal Public Defender is the real hero in this case. After the arraignment, he persuaded prosecutors to keep Wilson at the courthouse long enough for him to investigate Wilson’s claims of innocence.
No documentation exists about the process or how this happened, but eventually the ATF somehow realized they got the wrong man. Prosecutors quickly moved to dismiss the case, but they offered no written explanation as to why they wanted the charges dropped.
“Further review of the case reveals that the interests of justice would best be served by a dismissal of the pending charges as opposed to further prosecution. Based on the foregoing, the Government respectfully requests that the Court dismiss the pending charges against defendant Bryan Montiea Wilson,” the prosecution’s motion to dismiss states.
Assistant U.S. Attorney E. Elizabeth Major, the prosecutor who signed the motion to dismiss, did not return calls seeking comment for this story.
Wilson was released from federal custody around 4:20 p.m., and he walked out of the courthouse a free but damaged man. All of the charges were dismissed with prejudice at the prosecutors’ request.
No one told him how the ATF had made such a horrible mistake.
Civil suit(s)
Earlier this month, Wilson filed a federal civil-rights lawsuit against the two West Columbia Police Officer who falsely alleged he sold them guns and drugs while they were working as task force officers for the ATF.
His lawsuit, which seeks an unspecified amount of actual, consequential and punitive damages, alleges the officers committed a false arrest, in violation of his Fourth Amendment rights, and that their misconduct led to wrongful indictment/malicious prosecution, which violated his Fifth and Fourteenth Amendment rights.
“Defendants initiated a criminal proceeding against Plaintiff without probable cause — i.e., without a reasonable belief that Plaintiff, in fact, committed federal drug trafficking and gun crimes,” the lawsuit claims. “As a direct and proximate result of Defendants’ conduct, Plaintiff was indicted, arrested, searched, detained, and humiliated and is entitled to recover damages, present and prospective, including for lost wages, mental anguish, distress, shock, loss of reputation, the violation of his Fifth Amendment rights, and other expenses.”
Wilson’s suit details the harm his false arrest has caused.
He needed to take several days off work. Nowadays, he rarely leaves his house. He suffers migraines and his coworkers spread rumors about his arrest and his release. One falsely claims he flipped on a codefendant, which is the kind of rumor that can get him killed. Others claim he was arrested for rape and even murder.
According to his lawsuit, Wilson worries his teenage daughter may learn what the ATF did to him. His mother, this suit claims, “now calls her son while he is at work to check on his wellbeing.”
“Mr. Wilson is a father, brother, and son, and a law-abiding citizen who works for an honest living,” the lawsuit states. “He has never trafficked drugs. He is a lawful gun owner. He has no criminal record.”
A second civil rights lawsuit against the ATF is extremely likely.
Veronica Hill, spokeswoman for the U.S. Attorney’s Office for the District of South Carolina said she cannot comment about the case because Wilson has filed an administrative claim against the government — a prelude to a civil suit.
“When you want to file a (civil) complaint against a federal agency, you have to file an administrative claim first,” she said. “If it is not resolved within six months, or not resolved to the satisfaction of the claimant, a lawsuit can then be filed.”
Corey Ray, spokesperson for ATF’s Charlotte Field Division, which oversaw the investigation, did not return calls seeking comment for this story.
Guns on the table
Neither prosecutors nor the ATF allowed Wilson’s false arrest to dampen their enthusiasm for what they described in a press release as an “advanced, intelligence-based, multi-faceted law enforcement operation.”
“In June of 2022, in response to rising violent crime in the West Columbia area, the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) in Columbia launched an advanced, intelligence-based, multi-faceted law enforcement operation. The purpose of the operation was to target criminal entities and groups in the area, specifically those engaged in the illegal use, sale, and possession of firearms and narcotics. ATF established a controlled buy location, and ATF undercover agents and confidential informants began conducting controlled purchases of firearms and narcotics from criminal targets in the area, while local agencies conducted crime suppression operations,” the release states.
According to the press release, 210 firearms were seized and 20 people were arrested, including “members of the Bloods, Crips, and Gangster Disciple street gangs.”
Neither Wilson nor his false arrest were mentioned in the press release.
Takeaways
Were it not for the heads-up play of a Federal Public Defender, Wilson would likely still be in jail alongside 20 alleged gang members. It is not known if ATF agents were ever able to track down the suspect whom they mistook for Wilson, who actually sold them drugs and guns.
We will never know all of the allegations that the ATF made against Wilson or the details. Their federal complaint was quickly sealed and is no longer available to the public. However, the allegations Wilson’s attorney included in his civil suit are eerily similar to the allegations ATF made about Bryan Malinowski, the 53-year-old Arkansas airport executive whom ATF agents shot and killed in his home March 19.
The ATF also claimed they had made several undercover firearm purchases from Malinowski. They said they surveilled Malinowski for months, too. Malinowski will never be able to refute these allegations or file a civil suit.
Civil rights violations by the ATF have skyrocketed since the Biden-Harris administration weaponized the agency as part of its war on law-abiding gun owners. One can only wonder whether federal judges will take judicial notice of these injustices and start asking a few more questions before they sign off on any future request from the ATF, to ensure the agents don’t shoot another innocent homeowner or make another false arrest.
While several states have passed laws this legislative session protecting gun owner privacy by prohibiting the use of firearm-specific merchant category codes by payment processors, Colorado has done just the opposite.
On Wednesday, Democrat Gov. Jared Polis signed SB24-066 into law, basically creating backdoor gun registration in the state by requiring use of such codes.
At issue is a new Merchant Category Code (MCC) for gun purchases adopted by the International Organization for Standardization a little over a year ago. MCCs are used by payment processors (like Visa and Mastercard) and other financial services companies to categorize transactions.
Prior to the creation of the specific code for guns, firearms retailers fell under the MCC for sporting goods stores or miscellaneous retail. If the new code is used, credit card companies and other payment processors can tell the purchases were firearms.
This session, legislators in Utah, Kentucky, Iowa, Tennessee, Georgia, Wisconsin and Indiana passed laws prohibiting use of the code. A similar bill is still under consideration by lawmakers in New Hampshire.
State Sen. Tom Sullivan, sponsor of the measure in the Colorado Senate, said the bill is a life-saving measure.
“Credit cards have been repeatedly used to finance mass shootings, and merchant codes would have allowed the credit card companies to recognize his alarming pattern of behavior and refer it to law enforcement,” Sullivan said. “This bill will give us more tools to protect people, and make it easier to stop illegal firearms-related activity like straw purchases before disaster strikes.”
Interestingly, efforts are underway in Congress to outlaw the use of firearm-specific merchant category codes. Republican Reps. Elise Stefanik of New York, Andy Barr of Kentucky and Richard Hudson of North Carolina have filed a bill that would prohibit use of the four-digit code that’s been created to identify merchants selling firearms.
“The tracking of gun purchases is a violation and infringement on the Constitutional rights of law-abiding Americans which is why I am proud to introduce the Protecting Privacy in Purchases Act to prohibit radical gun grabbing politicians from tracking lawful gun purchases,” Rep. Stefanik said in a press release announcing the measure. “I share the concern of law-abiding gun owners across our nation that have voiced their fear that such tactics will work to serve the radical Left’s anti-gun agenda. I will always stand up for our Second Amendment rights as Americans and provide a critical check to any entity attempting to encroach on our liberties.”
The Colorado law will take effect 90 days after the adjournment of this session of the Colorado legislature.
Ask any Smith & Wesson collector, accumulator, or shooter what the most coveted gun displaying the S&W brand is and most likely, they’ll respond “registered magnum” in a confident, obvious-sounding voice.
Introduced in 1935 for the new .357 Magnum cartridge, the gun was essentially a custom-made revolver with hand-fitted parts, along with a “birth certificate” of sorts. Each gun was “registered” and came complete with its own registration card, hence the name “registered magnum.”
Registered magnums are considered the pinnacle of Smith & Wesson production, bringing hefty prices in today’s market. The guns were built to order, with customers specifying the type of finish — blued or nickel, the barrel length ranging from 3 ½” to 8 ¾”, and numerous front and rear sight options. The guns were also sighted-in at 25 yards, with buyers specifying either a 6 o’clock or “dead-center” hold.
In addition to the serial number, each gun was stamped with a registration number, complete with a corresponding registration card. After the purchaser filled out and sent the card back, a certificate signed by Douglas Wesson, confirming the owner’s name, registration number and customized features was sent to the owner.
The left side of Ed McGivern’s Registered Magnum.
Famous Registered Magnums
For their upcoming auction on Aug. 25-27, Rock Island Auction Company has a slew of registered magnums previously owned by very interesting people — the most well-known being Ed McGivern from the Dave Ballantyne Collection. Even if these guns are out of your price range, if you bid early, you can always say you had the honor of bidding on one, but it got away. Just reading about these guns and looking at the photos is informative and interesting.
A rare K-22 Hand Ejector Target belonging Ed McGivern.
Same gun, different pose.
Ed McGivern
Ed McGivern was considered the fastest shot alive before the likes of Jerry Miculek came along. McGivern (1874-1957), known as “the World’s Fastest Gun,” was fascinated by fast shooting after witnessing a shootout in Sheridan, Wyoming. He was a respected and well-known exhibition shooter and hand gunning author of the 20th century who also trained local law enforcement officers and federal agents with the FBI.
McGivern’s book, “Fast and Fancy Revolver Shooting,” was published in 1938. He was known for drawing and firing five shots into a 1-inch group at 20 feet in less than half a second (recorded as 9/20th of a second in August 1932).
The accompanying factory letter states the revolver (Reg. No. 2902) was shipped on May 25, 1938, and delivered to Ed McGivern of Lewistown, Montana, with a 5-inch barrel (currently 3 1/2 inches), McGivern bead front sight, deep “U” notch rear sight (currently a square notch), blue finish, and checkered walnut Magna grips. The letter goes on to state, it was authorized “no charge” by D.B. Wesson and marked “for fast double-action shooting” for Ed McGivern. The auction is Aug. 25, Lot 478.
The second McGivern gun available is one of the rarest S&W guns in existence, with only 96 manufactured between 1936 to 1941. A K-32 Hand Ejector Target revolver, these revolvers are in the 653388-682207 serial # range and are square butt “K” target frame five screws, with pinned 6-inch round barrel.
Post-World War II, this model became part of the K-22/K-32/K-38 Masterpiece series of target revolvers. The factory letter confirms the 6-inch barrel, McGivern gold bead front sight, humpback hammer, blued and checkered walnut grips. It was shipped May 10, 1939, to Ed McGivern of Lewistown, Montana.
The McGivern sight, a gold bead on a black post, which is named after him, is the same type of sight on this revolver. The accompanying S&W invoice for this revolver confirms the configuration, as well as Ed McGivern being the recipient. The auction is Aug. 25, Lot 479.
Box and factory letter are included with the gun.
Frank Baughman’s pre-production .357 Magnum
used in testing & Evaluation.
Special Agent T. Frank Baughman
The next Smith & Wesson registered magnum is a historic pre-production S&W .357 Magnum used in U.S. Government Testing & Evaluation by the military and FBI. It was owned by legendary FBI firearms expert and Special Agent T. Frank Baughman, the inventor of the Baughman Quick Draw sight.
As told by S&W historian Roy Jinks in the accompanying factory letter, “This revolver is a very important handgun in the history of the .357 series, being one of the very first .357 Magnums produced for testing and evaluation. Because this handgun was to be used for evaluations, it was not assigned any registration number.
The gun is one of a pair of prototypes assembled in March 1935. Its companion revolver was serial number 45809. The auction is scheduled for Aug. 25, Lot 1498.
Baughman’s gun comes with factory leather case and plaque.
An example of high-quality firearms artistry is found in
this pair chambered in .500 Linebaugh.
Where has all the time gone?” is a well-worn cliché, however, no one has ever been able to answer the question. And the older we get, the faster it seems to go. It only seems like a short time, but it happened 40 years ago. It was on the 4th of July, or as my late brother Terry Murbach always insisted, it was to be called Independence Day. We had had our family barbecue, and I was now home resting and relaxing and looking forward to a quiet weekend. It was not to be.
I received a phone call from a young man who said he was a revolversmith living outside of Cody, Wyo. His name was John Linebaugh and I had never heard of him. He was very enthusiastic about his pet project, and he had my attention, although I must admit I had doubts.
His reaction was to suggest he send me a test gun so I could see for myself. This is what he told me, “I’m sure my guns will stay on a car door-sized target to half a mile if you can hold ’em. They are bigger guns, both in caliber and size. We only claim 50% to 90% over a .44 Magnum, 1,500 to 2,000 foot-pounds energy in 71/2″ or longer barrels.”
That seemed to me an exaggerated claim, but I held on. “Practical, this gun uses .45 Long Colt brass, bullets and readily available components. No brass forming, reaming, trimming, etc. No special dies or malarkey. Use readily available bullets, molds, powder, etc. It is a total custom sixgun in barrel lengths from 43/4″ to 10″ or 12″. It is packable in reasonable-length barrels and handy enough for use from defense to hunting.
The guns hold to the heavy single-action tradition and are not specialized like the single-shot TCs. They can handle factory or equivalent loads and be at home under your pillow or in your belt, or be moved up the ladder to full potential with our recommended handloads and be used successfully on the largest game. I’m old school (that means single-action) and use and build common sense sixguns.”
Early Linebaugh .500 Bisley Model compared to one in .44 Magnum.
Special editions by John Linebaugh are the .500 Alaskan and the .475 African.
Packable, Portable and Powerful: The .500 Linebaugh.
Easy Power
At the time the prevailing wisdom said .45 Colt was weak but after spending two months shooting this first test Linebaugh Custom Sixgun, I was thoroughly convinced everything John said was true. I did take a wooden dowel and mallet with me to the first shooting session. I thought I would have to pound cases out of the cylinder, but it just didn’t happen. All the loads I tried extracted easily. I had no stuck cases, no blown primers, not even flattened primers.
I loaded everything just the way John instructed me including sizing all bullets to .452″ for the .451″ custom barrel. I started with new Winchester-Western brass using CCI Magnum primers. Even with new cases I full-length resized them before loading.
For bullets, I went with the standard Keith bullet, Lyman #454424 as well as 310 and 330 Keith-style bullets. I also sized the Lyman #457124, a 385-grain .45-70 bullet down to .452″. When my first article was published on this Linebaugh Sixgun, the editor decided not to publish the actual loads. The key to making everything work so well was and is tight tolerances and smooth, properly dimensioned cylinders.
Lee Jurras and John Linebaugh.
Dustin Linebaugh carries on the tradition of the Linebaugh sixguns.
Shop Tour
In July 1985, Brian Pearce and I loaded up my Ford Bronco with plenty of ammunition and big bore sixguns along with our sleeping bags and headed over to Cody to visit John. He was living with his wife and two sons, Dustin and Cole, in a small cabin 40 miles outside of Cody. There was no running water, and the family had to carry water from Line Creek in buckets.
Half of the cabin was used for living, and the other half for gunsmithing. A loft provided the sleeping area. We rolled our sleeping bags out on the floor, got up the next morning and had a great time shooting .45 Colt sixguns at long-range. Twenty years later Dustin Linebaugh, a superb sixgunsmith in his own right, his wife, and two young sons visited me and rolled out their sleeping bags in my family room.
John built me two custom .45 Colt sixguns, one being a heavy-duty, 51/2″ Abilene. This gun started as a .44 Magnum, and John re-chambered the cylinder and fitted a new barrel. My friend, the late Charles Able, furnished ebony stocks and over the years, this gun has been used with 260-grain and 300-grain bullets at 1,200 and 1,100 fps. The other one started life as a 2nd Generation .357 Magnum Colt New Frontier. I found a 43/4″ .45 Colt barrel and John re-chambered the original cylinder to a tight .45 Colt.
For many years both S&W and Colt supplied their .45 sixguns with oversized chambers. So much so one could often actually see the bulge in fired brass. This resulted in short case life and mediocre accuracy. With my “new” New Frontier, there was no bulging of brass, fired cases were removed easily from the cylinder, and accuracy was such this .45 New Frontier was a tack driver. I found 20 grains of #4227 under the Keith bullet would shoot one-hole groups at 25 yards. It can still do it, but alas, I cannot.
This custom-cased set of Linebaugh sixguns consists of a .500 and a .475.
Big Gun Origins
In the early days, John was struggling driving a cement truck and trying to do gunsmithing and I found out there wasn’t much money for them for Christmas. So Diamond Dot and I went shopping and had a very enjoyable time coming up with gifts for the family. The hardest thing to find was Lincoln Logs. We felt so good about being able to help them and certainly did not look for anything in return. However, it was not to be. John called me and said I should send him a base gun.
By now, John was building really big guns. He trimmed .348 Winchester brass to 1.410″, reaming the inside of the neck, and the result was the .500 Linebaugh. When my base gun returned, it was chambered in this new, extremely powerful cartridge. Using full loads with 400- and 420-grain bullets resulted in exceptionally heavy recoil. The Ruger Bisley Model, with its grip frame designed for heavy recoil, made the .500 Linebaugh usable.
When it looked like Winchester was going to drop .348 brass, John decided it was best to come up with another cartridge. His favorite rifle was the lever action .45-70. He trimmed this brass to the same length, loaded it with .475″ hard-cast bullets, and the result was the .475 Linebaugh. In the early days, it was necessary to make brass for both of these sixguns. However, it’s much simpler today with properly formed and head-stamped brass for both cartridges available.
Shooting that first John Linebaugh custom .45 Colt.
John’s first article on John Linebaugh appeared in American Handgunner in 1985.
The Shootist
In November/December 1984, John published the first issue of the magazine called The Shootist — dedicated to The Old School Sixgunner. John said of this new endeavor: “With this first issue of The Shootist we hope to start the bible of what is nearly a lost art, the art of Old School Handgunning.
We dedicate this first issue fittingly to Elmer Keith, who was indeed a shootist who brought us from the Black Powder era into the smokeless age, polishing and refining his ideas and knowledge with time. What we hope to do with The Shootist is to keep this knowledge alive and circulate it to those who, like ourselves, consider themselves a part of the Old West and Old School style shooter…. Our word is Practical.”
From the first issue in 1984 to the last issue in 1994, John published 15 issues. They were basically photocopies of hand-typed articles just as the writer submitted them; however, the information was and remains priceless. John often said he didn’t like big guns, just big calibers and just as with Elmer Keith, he looked upon the sixgun as something that was easy to pack, practical, powerful and could be carried all day and then placed in a bedroll at night. He opened all new vistas to the art of sixgunning. The above-mentioned sixgun he built for me is a 51/2″ Bisley Model .500 Linebaugh.
Comparison of the .500 Linebaugh and .44 Magnum.
Anything In The Lower 48
John became a close friend and I learned to listen to him when it came to anything about sixguns. Over the years, we came to the same conclusion. A large caliber heavy bullet at 1,200 fps is more than adequate for hunting situations and will shoot through just about anything that walks in the lower 48. More muzzle velocity simply flattens out the trajectory, which is rarely of concern for the up-close sixgun hunter.
I settled on 300-320 grains bullets for the .45 Colt heavy duty sixguns using 21.5 grains of W296 or H110 with the 310-grain Keith Bullet, which gives me 1,200 fps from a Ruger 71/2″ .45 Colt Blackhawk. This load is only for heavy-duty sixguns. With the .500 Linebaugh, 29 grains of the same powders under a 440-grain bullet gives the same muzzle velocity from a 51/2″ barrel.
Needless to say, I cannot handle any of these loads at this stage of my life, so with the .45 Colt, 10 grains of W231 gives me 860 fps, while nine grains in the .500 results in 825 fps. They are still powerful loads and manageable for me.
John gathers with three special friends: Gary Reeder, Ben Forkin and John Linebaugh.
A Legend Lost
For decades John had two carry sixguns: a 4″ S&W .45 Colt for everyday use and a 51/2″ .500 when traveling off the beaten path. In later years, he also discovered the .45 ACP 1911. He always stayed true to his Old School Gunology. John was born in Missouri in November 1955, and like Elmer Keith, he migrated West settling in Wyoming. He was called Home on March 19, 2023. One of his family members wrote the following for his memorial service:
“He smiled his signature smile as he pulled down his old cowboy hat. I asked if this was goodbye; he just shook his head and chuckled. He said that this wasn’t goodbye, just a simple see you later on the other side. I asked him how is this ‘see you later’ when you’re already gone? He said in a cowboy tone, ‘Because one day we will meet again, maybe not here on earth, but one day in another world.’ I have asked him if so, where would we meet?
Then he smiled as he looked up to the sky, ‘It’ll be in greener pastures,’ he said, ‘on the back of two untamed mustangs, that is when I’ll see you again.’ Then I watched as he pulled on his boots and walked out the door. His old-timer’s laugh still filled the room. You could still smell the scent of sagebrush and gunpowder. He laughed as he watched our tears fall. ‘Stop your crying,’ he said. ‘I am up here with the good ol’ boys, catching up on lost time. Stop your tears,’ he said, ‘for I am up here with my Lord and Savior. Stop your tears,’ he said, ‘for I had done my time on this old earth. And boy … It was one hell of a run. Stop your tears,’ he said, ‘for I left the cowboy way … with my boots on.’”
John, keep the beans bubbling and the bacon sizzling, but I have one request. Pick out a mild Mustang for me and I will see you soon.