Categories
All About Guns Cops Fieldcraft Gun Info for Rookies

COP TALK: OFFICER INVOLVED SHOOTINGS: NEED FOR A NEW PARADIGM WRITTEN BY MASSAD AYOOB

We don’t try our cases in the press” has to change. Here’s why.

There’s a Latin saying: Silentium est consensus. It translates to “silence equals consent.” When a wrongfully accused person does not answer the charge, most people read it as an admission of guilt. It’s a legal principle of our law that this is not so, but unfortunately, only attorneys and cops seem to realize that.

Those same lawyers and cops have all been told in law school and the police academy, “We don’t discuss our cases in the press; it will all come out in court.” Unfortunately, in recent years, things have changed. Greed-motivated plaintiffs’ lawyers and politically motivated prosecutors have taken to trying their cases in the press, and when the accused do not respond in the same venue, well … silentium est consensus becomes the uncontested verdict in the Court of Public Opinion.

Kenosha: Kyle Rittenhouse fires the shot that “vaporizes” Gaige Grosskreutz’s
gun arm, which is holding a GLOCK 27 aimed at his head.

Riots

Los Angeles, 1992. A hulking suspect became violent during a traffic stop. An early version of the TASER had no effect, and when four LAPD cops “swarmed” him each grabbing an arm or a leg, he threw them aside like a terrier flinging rats. A citizen named George Holliday turned on his new camcorder in time to catch the man, Rodney King, trying to jerk Officer Lawrence Powell’s Beretta from its holster. The batons came out, and a bit over a minute and 50-some PR-24 swings later, the man was in handcuffs. The video found its way quickly to the media.

The suspect was black, the officers white, and the “Rodney King beating” became a national outrage. The public saw, again and again, the ugliest 10 seconds of the video, though King’s gun snatch attempt was never shown until the trial and then seen by only a small percentage of the public. When the cops were acquitted, riots followed, taking more than 60 lives, injuring thousands, and wreaking economic devastation in what was already one of the most poverty-stricken parts of the city.

Kenosha, 2020. Almost three decades later, another video surfaced in a city of 100,000 in Wisconsin. It showed police officers with drawn guns following a black man, Jacob Blake, from the right rear of an automobile containing two little kids, around the front to the driver’s door, where one officer finally shot him seven times behind lateral midline. It became an instant cause célèbre: “Unarmed Black Man Shot Seven Times in Back.” The police department said not a word in defense of the officer’s action. The city burned and incurred tens of millions of dollars in damages, and three men were shot on video in demonstrable self-defense, two fatally, by a young man subsequently tried for murder.

From the beginning, a knife had been visible in Blake’s hand, and the officer fired only after he perceived the man turning on him with it within arm’s reach. In truth, the story should have been “Cops Save Black Children from Knife-Wielding Kidnapper.” Yet the “unarmed” narrative continued even after Blake himself confessed he was armed and the state Attorney General’s Office at last released the truth — weeks after the riot and the killings.

Circle shows Jacob Blake’s knife in his left hand, as cops follow him with drawn
guns shouting commands to drop it, moments before he is shot.

By Con

Years after the King conflagration, when Charlie Beck became chief of LAPD, he created a policy whereby after any potentially controversial OIS (Officer Involved Shooting) a press conference would be held. It would include the original 911 call, dashcam and bodycam video, scene photos and a narrative of what actually happened. It would be widely disseminated to the public, with the promise the investigation would continue, and the public kept apprised.

Las Vegas Metropolitan Police Department followed, setting a high standard for thoroughness. So did a number of other police departments.
LAPD to LVMPD and beyond, except for disturbances caused nationwide by the death of George Floyd in Minneapolis, every department following this policy has escaped major rioting. The reason is, they have “gotten ahead of the story” and kept false narratives from gaining traction.

We have seen the same principle in armed citizen self-defense shootings. A few years ago in Austin, Texas, John Daub had to shoot and kill a home invader who broke through the front door of his home while his wife and children were present.

He was a member of the Armed Citizens Legal Defense Network (armedcitizensnetwork.org), which had attorney Gene Anthes on the scene before the blood on the floor dried — telling reporters what had really happened. The result: a justifiable homicide ruling and public support and sympathy for John and his family.

A rule of human conflict is when one’s opponents change their attack strategy, one has to alter defense strategy accordingly. With today’s twisting of the truth by journalists and lawyers with less than honorable motives, we need police departments and attorneys who will not leave those who righteously pull the trigger undefended in the unforgiving Court of Public Opinion.

Categories
All About Guns Fieldcraft

AYOOB ON HANDGUNS WHY CARTRIDGE CAPACITY IS IMPORTANT WRITTEN BY MASSAD AYOOB

Yesterday and today: S&W Model 15 with six .38 Special rounds;
Springfield XD(m) with 20 rounds of 9mm.

 

I don’t always carry a semiautomatic pistol with a double-stack magazine — but, about two-thirds of the time, I do. Meanwhile, American law enforcement has gone sweepingly to 18-shot 9mm pistols, often with triple spare magazine pouches. In this country, armed citizens have historically modeled their self-defense handguns on what the police carry and, in both cases, the decision is largely driven by what the criminals of the day are doing.

Let’s look at some stats. In 2019, a study published by the Policing Institute determined of 1,180 police officers who had been in shootouts, 126 fired 12 or more rounds to finish their fights — a tad over 10%. Let’s keep this in mind when legislators demand laws that limit a law-abiding citizen’s magazine capacity to 10 rounds plus one in the chamber.

Tom Aveni at the Police Policy Study Council in 1998 referenced a study of Washington, DC Metro officer-involved-shootings from 1994 through 1998 that encompassed nearly 500 shootings. In 126 of those, the officers fired more than the six rounds they would have had in their service revolvers before they adopted GLOCKs, and in 67 the officers fired more than 10 rounds.

 

Micro-Compact Springfield Pro with Hex optic, its payload
of 16 9mm rounds, and a ruler for perspective.

Relevance

 

When people say “Police stuff doesn’t matter, I’m an armed private citizen,” I cringe. We must never forget the police are fighting the exact same criminals the citizens have armed themselves against. A huge number of police shootings evolve from situations where the perpetrator(s) attacked a private citizen to begin with, and this is why the police made contact with them in the first place. In the infamous 1986 Miami shootout, the two heavily armed robber-killers the FBI agents engaged had been shooting innocent citizens to steal their cars and their guns. In the course of the cataclysmic final shootout, FBI men Gordon McNeill and John Hanlon were helpless with empty revolvers when cop-killer Michael Platt crippled them with rifle fire. This incident led the Bureau to adopt auto pistols as standard.

In the famous NYPD shooting on the Grand Concourse, the perpetrator was fleeing from a rip-off when the running gun battle started in which he was still on his feet after being hit with 18 non-expanding .38 Special bullets before a 12-gauge slug dropped him for good. In the famous Skokie, Ill. case where hero cop Tim Gramins stood alone against the ambusher who had just terrorized bank employees during a robbery, it took him 33 rounds of .45 ACP to finally win the fight after 17 solid hits; he was getting toward the end of the last magazine in his GLOCK 21 when he delivered the brain shot that finished the fight against a perp armed with a 16-shot 9mm, a .380 and an SKS rifle. (Tim later switched to a 9mm GLOCK 17 and more spare magazines.)

As we look at the police round-count figures earlier in this column, remember they include many cases of multiple officers firing together. Two cops needing eight rounds apiece to win a gunfight translates to 16 shots needed to achieve the same righteous objective, even for a lone officer or a single armed citizen. And let’s not forget the citizen won’t have body armor, patrol rifle or shotgun and instant radio contact for backup readily at hand.

 

In Addition to Which …

 

Today we’re seeing more armed home invasions involving whole gangs of criminals, not just the lone nutcase. We are seeing more bad guys than ever — gang bangers, stalkers, armed robbers — wearing body armor. We are seeing cases of ambushers who know how to use cover and movement tactics. We already had violent criminals “feeling no pain” from alcohol and assorted drugs, and now we have the Fentanyl epidemic to boot. All these things can add up to more shots required to stop bad guys.

When the magazine limit advocates tell you “Well then, just carry spare ammunition to reload with,” your answer might be: “Even if you’re a master shooter who can reload a pistol in two seconds, would you consider it a fair fight if one boxer but not the other was required to lower his hands for at least two seconds in the ring after every 10 punches thrown?”

The five-shot snub-nose .38 has ceased to be the most popular primary line of defense for the armed private citizen. The reasons listed above should give you a good start on explaining why to those who just don’t get it.

Categories
Fieldcraft Manly Stuff

The COMPLETE Guide to Pigeon Shooting – Decoying 130 Birds!!

Categories
All About Guns Fieldcraft War

Lessons On Gunfighting From Wyatt Earp

This interview excerpt about the lessons on gunfighting, supposedly said by the legendary lawman, gunfighter, and frequent movie subject, Wyatt Earp, comes from a 1994 book written by Stuart Lake, Wyatt Earp: Frontier Marshal. You can find the book online at a hefty price since it’s long out of print.

“I was a fair hand with pistol, rifle, or shotgun, but I learned more about gunfighting from Tom Speer’s cronies during the summer of 1871 than I had dreamed was in the book.

Those old-timers took their gunplay seriously, which was natural under the conditions in which they lived. Shooting, to them, was considerably more than aiming at a mark and pulling a trigger.

Models of weapons, methods of wearing them, means of getting them into action and operating them, all to the one end of combining high speed with absolute accuracy, contributed to the frontiersman’s shooting skill.

The sought-after degree of proficiency was that which could turn to most effective account the split-second between life and death. Hours upon hours of practice and wide experience in actualities supported their arguments over style.”

Also this

1. “No wise man ever took a handgun to a gunfight.”

Earp obviously knew the advantage of weapon superiority. If you know your opponent is armed with a handgun, bring a shotgun, or rifle. Give yourself every advantage possible. You don’t want to fight fair. You fight to win. Something to think about for home defense.

2. “The most important lesson I ever learned was the winner of a gunplay usually was the one who took his time. The second was if I hoped to live on the frontier, I would shun flashy trick-shooting, grandstand play, as I would poison. In all my life as a frontier peace officer, I did not know a really proficient gunfighter who had anything but contempt for the gun fanner, or man who literally shot from the hip.”

The saying “slow is smooth, smooth is fast” applies here. Also, a fast miss never neutralized anyone. Guns have sights on them for a reason. Use them! Pick up your front sight during combat shooting. As Gunsite, famous fighting school preaches, “front sight, press” is the key to winning armed confrontations.

3. “Fast is Fine, But Accuracy is Everything…”

Again, a fast miss never helped anyone.

Take the time to use your front sight for making solid hits. The spray and pray mentality is useless with today’s high-capacity semi-autos.

4. “The most important lesson I learned was the winner of a gunplay usually was the one who took his time.”
This is related to #3. Take your time, but do it quickly, ensuring a smooth draw. Pick your front sight up and press your trigger smoothly, not jerking your shot, missing your adversary.

5. “Shooting at a man who is returning the compliment means going into action with the greatest speed of which a man’s muscles are capable, but mentally unflustered by an urge to hurry, or the need for complicated nervous and muscular actions which trick shooting involves.”

All this means is don’t lose your head. Easier said than done, but a cool head will prevail. Focus on the mechanics of a smooth draw and calculated shot. Fast shooting is useless in the “spray and pray” fashion. Remember your training. We all revert to training under stress … which emphasizes how vital proper training is.

If you’re not formally trained, do it. Training is the most important accessory you can buy, more than any gun, or ammo.

Categories
Fieldcraft N.S.F.W.

Gun!?! What gun!?! NSFW

Categories
All About Guns Fieldcraft Some Red Hot Gospel there!

Classic Carry Guns – Give Used Guns a Shot by TRAVIS PIKE

Used guns are a great way to shop for a bargain-priced self-defense pistol. As we accept more modern guns with modern features, like rails, optics, and ambidextrous controls, we can find guns that lack those features for a relatively fair price. That’s why we’ve come to the classic carry gun corner to find you an option for a great handgun at a great price.

The Problem With Classic Carry Guns

Before I gush over some quasi-retro firearms, let’s be real here. There are some downsides to these classic carry guns. Most of them are heavier and bigger than modern guns. There is a reason that the P365 was so revolutionary. These older guns are not as efficient.

The biggest downside will come from trying to find a holster. Old guns aren’t typically addressed by modern holster manufacturers. This can limit you significantly in your holster selection. That can make carrying some of these classics a chore or require a custom holster to be made.

All that being said…

The Best Classic Carry Guns

Beretta 80 Series

Beretta recently revived the 80 series with the 80X, but the classic 80 series are still some classic carry guns. The 80 series is made up of a mix of .22LR, .380 ACP, and .32 ACP handguns. The most popular is the .380 Model, which consists of the 83, 84, 85, and 86 models. These are small, compact firearms but are not pocket pistols. They are incredibly well-made and very easy to shoot.

Their ergonomics are on point and are some of the best examples of what a metal-framed gun can be. They have that Beretta M9 style shape, with much thinner grips that make the gun easier to conceal and more accessible to those with small hands. They are hand-filling guns, and that makes them quite easy to control. Capacity varies between thirteen and seven rounds depending on caliber and design. Beretta made various models in both single and double-stack capacities.

The Beretta 80 Series seem out of date until you start shooting. They are all fairly light recoiling and very easy to control. They don’t beat your hand up like a .380 Pocket pistol and are much easier to control than even a P365 in 9mm. Guns like the Beretta 81 offer a .32 ACP option with very little recoil for those who might be recoil-sensitive. The .22LR options are silly soft to shoot. These are all top-of-the-line classic carry guns.

Beretta makes legendary firearms, and you’d have a hard time finding one that didn’t work well. These guns might be past their prime and seem old school, but they are very easy to handle and fun to shoot. They are more akin to the Shield EZ series, especially the 86 with its tip-up barrel.

The Ruger P Series

The P series might have been the series of firearms that established Ruger as a company that makes tanks for guns. They might be ugly, but they are 100% functional, incredibly reliable, and last forever. The Ruger P series guns are still kicking around and are still quite affordable. I run across these guns for less than 300 dollars all day long, and they still represent self-defense-worthy handguns.

The P series is fairly broad. You can pick from numerous models in various calibers, including 9mm, 40 S&W, and .45 ACP. The P Series lasted from 1985 all the way up to 2013. Over that time, there were tons of variants. The P85 through P944 used investment cast metal frames, and the P95 and beyond used a polymer frame. The modern polymer frame models also feature a rail system.

These are pure ’80s guns. They feature the hammer fire design that was popular for the era. The gun has a combined de-cocker and safety that was ambidextrous. They are fairly simple guns but were quite easy to shoot and handle. The guns feature modern capacities and, outside of the .45 ACP, used double-stack magazines.

They aren’t fancy, they aren’t pretty, but they do function well. If you can get past their blocky design and ugly frames, you can have a very capable firearm for very little money. I’d choose a Ruger P series over most modern budget options. If you are looking for a more carry-friendly option, the P94 and P95 offer compact options for a tank-like classic carry gun.

Smith and Wesson 3rd Gen Guns

Smith and Wesson produced a number of semi-auto handguns from 1913 onward, and in the late 1980s, they arrived at what is collectively known as the third-generation pistols. These represent the last line of S&W automatics to use all metal frames, DA/SA hammer-fired actions, and a mix of double and single-stack magazines. They were quite popular with police forces and remain a great option these days.

Some are more expensive than others. The S&W 1006 and 1026 in 10mm, for example, are not cheap options. However, the 5906, the various 900 series guns, and even the 4506 tend to be fairly affordable and easy to find. These third-gen guns come in all the big calibers, including 9mm, 45 ACP, 40 S&W, and, of course, the aforementioned 10mm. What’s a gun from the late 80s and early 90s without a 10mm chambering?

These heavy steel guns might weigh you down a fair bit, but they can still be fantastic classic carry guns and home defense options. S&W produced some small subcompact models, including the various 9mm subcompacts like the 908 and 3914, and basically every model that starts with 39. These are still quite compact, and while unusual in today’s era, they still last for basically ever.

If you find a lack of Picatinny rails disturbing, then the TSW models might be for you. These guns feature a nice metal rail for all the accessories you could ever need, but the TSW models tend to call for a higher price on the used market.

Smith and Wesson SW99 – Classic Carry Option

Let’s stick with S&W because they’ve been around a long time, and they have a wide variety of pistols in their lineup. In the late 1990s, it was apparent that polymer-frame, striker-fired guns were going to be the dominant force in firearms. S&W had already tried to produce one in the budget-friendly Sigma series but got sued by Glock. Plus, the Sigma series weren’t duty-ready guns. S&W teamed up with Walther to produce an S&W pistol.

Kind of an S&W pistol, anyway. It’s a Walther P99 with a standard rail. The SW99 and P99 are nearly identical, and the SW99 came in both 9mm and 40 S&W, like the P99, but the SW99 also got the 45 ACP. These polymer frame pistols were a joint effort. Walther made the frames, and S&W made the slides and barrels. Like the P99, these are one of the very few DA/SA guns that are striker-fired. A decocking button sits on the top to instantly toss it back to double action only.

The SW99 trigger is absolutely fantastic. The DAO is super smooth, and while heavy, it glides rearward. The single action is crazy light and absolutely fantastic. It’s a great setup that I wish was a bit more common. I really like the striker-fired DA/SA design. Sadly, the SW99 is one of the very few options out there.

What’s great is that the SW99 remains affordable. Walther fans want P99s, and guns like the P99 compact are fairly tough to find. However, the SW99 compact is easy to find and fairly cheap. These guns use Walther mags, and they tend to be fairly common. This is one of my favorite classic carry guns.

Glock Trade-Ins

Finally, another great option is the great many Glock police trade-ins out there. Glock pistols dominate the law enforcement market, and with a new generation of Glock getting out there and with competition from SIG, used Glocks are hitting the market hard. Glocks are great guns that last forever and are well-reputed for their durability, reliability, and general effectiveness.

A lot of these Glock pistols are the .40 S&W models that have been traded in for the great 9mm influx. Plenty of Glock 22s are floating around at a great price. Additionally, the Glock 23 and 27 are popular trade-ins. In 40 S&W, these guns can be found for less than 400 dollars. That’s a great price for a very reliable weapon, even if you have to deal with 40 S&W.

With that said, we do see some 9mms coming in and out, and these are great grabs. The desirability of 9mm does create an increased cost, but they are still fairly affordable firearms all around. Glock trade-ins are a great way to get a great handgun for a low price. If you see one, act quickly because they tend to sell fast.

Giving Used Guns a Chance

The used gun market is nothing like other used markets. Used cars can be a gamble. Used furniture is for the insane, but used guns are a great choice. When something is wrong, it’s easy to see. Cracks in frames, bad bores, and the like don’t hide easily. Typically, used guns are rarely shot, but they often have a chunk of their price squirreled away.

A used gun allows you to get a great gun at a budget gun’s price. Sure, they might not always have rails, night sights, or be optics ready, but they go bang and do so reliably.

Categories
Fieldcraft

Massad Ayoob “Cute” Lawyer Tricks

https://youtu.be/cTs-ZKxS9SA

Categories
All About Guns Fieldcraft Gun Info for Rookies

Target engagement and the MILRAD Reticle ByJohn Boyette

This article is the part of the basic portion of the Trace Armory Group’s. Mil-Dot Usage Class I have been teaching for the past two years with great success. The ability of my students to range, engage and drop targets need it before hunting, competitive shooting or LE/Military Sniping is just great to watch. I understand not all of us have the ability to go to a training class so I wanted to share some of the information I train people with. So you can become a better marksman in your endeavors.

The Miliradian reticle can be of great use to a shooter in engaging the target. The key is to understand how a Milrad can aid you in target engagement. The four basic options the Milradian reticle gives you is:

  1. Range finding
  2. Bullet drop compensating
  3. Windage compensating
  4. Mechanical offset aim points

We will talk about all four basic options the Milrad reticle gives you the shooter the ability to engage a target no matter what situation faces you. First we will start by range finding.

Range finding with a Milrad reticle

The two basic steps to range finding of a target are:

  1. To know the target size or the size of something near the target.
  2. The two basic formulae to find the targets range in their unit of measure.

Trace Armory Group MilRad image

The formulae are:

If you use meters as your unit of measure:

Width or height of target (meters) X 1,000 divided by the mil size of the target in the reticle = range in meters.

Width or height of target (in inches) x 25.4 divided by the mil size of the target in the reticle = range in meters.

If you use yards as your unit of measure:

Width or height of target (yards) X 1,000 divided by the mil size of the target in the reticle = range in yards.

Width or height of target (inches) x 27.778 divided by the mil size of the target in the reticle = range in yards.

Now this is good and all if you know the targets size, if so this process works. You can go long hand, use a calculator, or a Mil-Dot Master. All systems work just fine, it’s just a matter of speed and what you need.

The main issue that comes up is with targets that are not standing in on location all day long, not moving around or just popping in and popping out of your line of sight. How do we deal with this issue? Well we can set range cards off of the landscape in front of us. The distance to that blue car in front of you in the hide is 430yds, or the distance to that door is 231yds and so on. Make a range card and as target’s move back and forth around known distance landmarks we have there approximate range at least close enough for a human sized target to get engaged.

Well this process works just fine if you plan on staying in one location for an amount of time and have the security, time, and cover/ concealment to fill out your range card and sector sketch. What do you do in a liquid battle field where you move from point to point? With your inability due to time and motion of your unit to setup a range card and hunt a target of opportunity? What’s the next skill set to use?

Trace Armory Group MilRad size chartThe best way is to run a flash Milrad card. I use flash Milrad card sizes of 19 by 9 inch Milrad reference sheet just like the one to the left.

The measurements of 19 by 9 inch are based on the average human’s width from shoulder to shoulder. Some use 20 inches as the old standby. But as the military has learned not all people are build the same. Some theaters of operations an 18 inch wide shoulder to shoulder measurement is more accurate than a 20 inch width. So a good average of 19 inches works for an 18 inch or 20 inch measured target under 500yds. The 9 inch measurement is the average side depth of a human. This is for a left or right side engagement of the target.

Using a 19 by 9 inch Mil reference sheet, you now have the ability to take a more precise flash mil reading of the reticle as you see the target in the area of engagement. To engage a target using the flash mil technique all you need to do is judge the targets width and see where the targets reading falls in the flash mil reference card. Once this is done, you have a good idea of the targets distance to you and you can adjust aimed fire to the right hold or ZERO distance. Keep in mind when using a .223/5.56mm or a .308/7.62mm caliber rifle the flash mil works best under 500yds.

Bullet drop and Windage compensating

To find what your bullet drop is at each range there is only one real way to do this. You must go shoot and record all data in a log book, a lot of people are running a ballistics program to get an idea of where the bullet will impact at. But the true data is in shooting at known distance. Always keep in mind your data that is logged in your logbook has nothing to do with your true bullet drop. Your data is 100% based on how well your riflescope tracks in its unit of measure. This is why you could have different data than other shooters on the same day engaging the same target shooting basically the same rifles and ammunition. What you are dealing with is two totally different riflescopes adjusting in there own way.

As you gain your data in what ever unit of measure your riflescope adjusts in. It would be a great idea to covert that dialed data to reticle hold data. IF you have an IPHY or MOA adjusted scope all you need to do is take your value and divide it by 3.438. By doing this you will convert the IPHY or MOA dialed data to a MILRAD value. Keep in mind that the value of 3.438 is how many true minutes of angle there are per-mil. So if you have an IPHY adjusted optic this will be off by about a 0.1 MILRAD per 0.9 MILRAD of data gained. Now you can use the MILRAD value for holds. This is also true for windage also.

Here is an example:

Trace Armory Group MilRad to MOA chart

As always these examples are just that, examples. You always need to go and shoot your dope, convert it and confirm it using dialed and hold data. Some people are starting to own .1 MILRAD, 1 cm, adjusted optics. These riflescopes adjust in a .1 MILRAD value, with a MILRAD reticle there is no conversion for you to do. Your dialed DOPE is the same as your HOLD DOPE, much easier and honestly a better system than using a two different unit’s of measure in one riflescope.

What if you the shooter decided to combine the ranging ability and the bullet drop characteristics of the MILRAD based reticle for target engagement all at the same time? What an idea. Everywhere I have been to be it a school, or reading always separates these two abilities of the MILRAD reticle. If you blend them you can engage targets much faster under 600yds. This is how it’s done.

As we have read we can use flash mil as a faster way to gain the targets range, and now we know what our mil hold is to known ranges using a dialed ZERO in the riflescope. The next step is to know what target size we will use. For the Military and LE Sniper we can go back to the 19 inch / 9 inch target size. For the competitor or hunter we need to find the right target size for our usage and we will cover these sizes later. But for now let’s work on the 19 inch / 9 inch flash mil.

Trace Armory Group MilRad chart

With this information I can now adjust my 19”x9” MILRAD cheat sheet from 100 to 495yds. I can now say that if the target reads the width of 5.2 MILRAD to 1.05 MILRAD I can hold center mass with a 400yd ZERO and send the round down range. Now let’s see how this works. The bullets flight path is well within a 36 inch target from 0 to 495yds using a 400yd ZERO Point of impact. This is called danger space. Not so much danger space for you, it’s the targets danger space due to the ease of engagement. The bullets summit never reaches a maximum Ordinate of 18 inches “half of the targets height” above the line of site. The summit of my ballistic curve is between 200yds to 225yds and noted in the elevation in inches colored orange with a height above the line of site of 12.5 inches.

 

To put this in simple terms if I was shooting a human target running a 400yd ZERO and I aimed center mass and the target was at 215yds my bullet would hit below the chin. Not ideal but you take what you can get in a gunfight.

At this point my Milrad range card will read as follows:

Trace Armory Group MilRad 36x19

This Milrad range card will help me engage targets at a faster pace than before with having hard data per distance and using the long math for mil range.

Trace Armory Group MilRad chart point blank range

One key here is this, just because you can get a center mass shot, does not mean you will have a kill with bullet impact or even take the target out of the fight. This technique for target engagement on a liquid battlefield as targets moves around pop-in, pop-out of the battle space. You will also see I have the Point of Impact “POI” listed. If I need to do a precision shot on a downed target. I have seen an Iraqi Fidayeen member take a burst from a M240B at 450m and go down and get back up again. IF your bullet does not strike a kill zone area there is no guarantee that the target will stay down. As in this target engagement a well placed burst fire made short order on a non-mobile target. When engaging targets with your SWS you may run in to the same situation. So having accurate hold point in your reticle wile using danger space is a critical task.

The next question is, well this is all good and all, but how about us target shooters out there that shoot in competitions? We can use the same framework of danger space but on a smaller target. I was just at the Practical Marksman Challenge II rifle match in Society Hill Alabama as a RSO. In this match I would say of the steel targets size, most where 2-3 MOA in size at unknown distance. The common sizes of steel targets where:

  • 6” diamond shaped
  • 18”x10” rectangle
  • 12” diamond

I would say most tactical competitive shooters run a 100yd ZERO, why I do not know but they do. So we will base a simple process of target engagement around a 100yd ZERO for the listed target sizes. I know that my 200yd Mil hold is .5 Milrad from 100yd ZERO, my 300yd Mil hold 1.3 Milrad from 100yd also. I can use this to my advantage to engage targets under time. The below picture explains how this works.

Trace Armory Group MilRad chart point blank range steel target

Lets say on a firing stage I have 45 seconds to engage a pistol target that is under 12 feet away, then go to a 6” diamond and a 12” square at un-known distance with two rifle shots each target.

Sounds hard? Come on down to the Practical Marksman Challenge rifle match and let me know. This was lane 16 I ran as a RSO. If I was a shooter the first step I would take is guess the near and far distance. I would say the 6” target is between 150yds and 250yds. If I know the size of a full Milrad in 100yd increments I have a fighting chance to get a hit on these targets within my timeline.

When the time starts I engage the pistol target hostler a hot safe pistol and load my rifle, then take a look at the target size. The first picture above is a 6” plate that reads more than 1 Milrad. I know a Milrad @ 100yds is 3.6” due to the target size I can hold a little off the 12 o’clock and see my 100yd ZERO to my 300yd hold point is covered by the target size in the reticle. This tells me that from 100yds to 300yds my DOPE for these distances are covered by the reticle. So I send the round down range and get a hit. In the first picture I have from 100yds to 300yds covered by target size. I assumed the target was between 150yds and 250yds the target covers both hold points. I will get a hit on this target.

Due to target size, the holds the target covers, I feel I can get a hit on this piece of steel. So I send it, with this target size of .8 Milrad I am at 200yds, I get a hit and make time and score.

What if the target is smaller? If you look at the second picture the target is smaller than 1 Milrad, since I know a Milrad at 200yds is 7.2” this makes since. By holding again off the 12 o’clock my 100yd, 200yd hold point of .5 Mil is covered by target size again. Keep in mind I have no real idea how far the target is. I am using the targets size and my hold points as a BDC. If I have holds that are covered up with steel and the target is within the distance that my holds are showing I get a hit.

This type of danger space works and this is also how you can “see” your hits on a target. If you look at the below chart you will see the bullet placement matches the MILRAD hold location. At all ranges.

Trace Armory Group MilRad chart danger space

Mechanical offset aim points

Mechanical offset is the difference between line of sight and line of bore. Most people call this sight height and this is correct if you are measuring for height of your rings to let your riflescope clear the barrel. But this same measurement will have your Point of Aim “POA” and Point of Impact “POI” have a shift between your near ZERO range and the rifles crown. If you need to take a precision shot short of your ZERO range you can do a hold off using your MILRAD reticle to make a precise bullet print on the target.

The process is simple. Take your known ZERO range 100yds, 200yds, 300yds or what ever you want to use and we will find where the bullet prints for ranges less than 100yds. The first step is to mark off 100yds in 10yd increments and place ten ½” and a 1” dot on the target board. Once done we will shoot a 3 rnd group at 100yds to confirm the 100yd ZERO is set at the 1” dot. Now we move to the 90yd line and take a shot holding center mass on the first ½” dot. If the bullet prints low or high you use your reticle to see the offset from aiming point to bullet hole and on the second shot use this hold to have the bullet print on the target. Once done move to the 80yd line and repeat the same process.

As you move down range you will see the bullet impact move away from the aiming point of the ½” dot. This distance between the target and the bullet print can be measured by your MILRAD reticle. So lets say your 40yd offset is 2.3 MILRAD low. As you see it on the target, all you need to do is hold over 2.3 MILRAD and send the next round to confirm that hold it’s that simple.

Now you have a shot at 40yds you know from 100yds you need to hold 2.3 Mil. Well if you have a 200yd ZERO dialed in and you need to take that 40yd shot what do you do now? These are the questions you need to have an answer for before you need to take the shot. These types of drills can keep a person very busy on a 100yd or 200yd range for a long time. There is a real need for a LEO Sniper to know his short range holds even under 10yds of distance. This simple drill is critical for the AR-15 family style of rifles due to there higher line of sight to line or bore measurements compared to a manually operated rifle.

These are just some of the many abilities a unit of measure in a riflescopes reticle can aid you in. Yes it is true; you can use a Minute of Angle reticle also. I hope this aids you in your shooting needs.

John Boyette
Owner and Instructor
Trace Armory Group
919-428-5265

Categories
All About Guns Ammo Fieldcraft

.22 hornet(RUGER) V.S Impala head and lung shot. Is this even possible

Categories
Fieldcraft

That horse is REALLY not amused by her actions!