Category: All About Guns
As World War II progressed, Germany struggled to keep up in the battle against the growing numbers of Allied tanks.
While the Wehrmacht’s anti-tank guns were the most formidable weapons of their type on the battlefields of Europe, the cost to manufacture the guns and their ammunition became an unbearable strain for the Reich’s economy.
Consequently, the Germans sought lower-cost options, and these new weapons focused on the use of powerful hollow charge warheads in a rocket projectile. Range and accuracy were sacrificed for economical mass production.

Most famous among these developments were the 8.8cm Raketenpanzerbüchse 54 “Panzerschreck”, and the various sizes of the Panzerfaust anti-tank grenade launcher. Combined, these short-range but highly effective AT weapons accounted for the largest percentage of Allied tanks destroyed in the last year of the war.
Both could penetrate the armor of any Allied tank, provided they achieved a solid hit. The Panzerschreck (with shield) weighed a hefty 24 pounds unloaded but could engage targets out to 150 meters. The Panzerfaust weighed less than 14 pounds but had an effective range of just 60 meters.

Neither was an optimal solution, but by late 1944 these short-range weapons had become the new normal for German anti-tank units.
A US intelligence report from late 1944 noted: “Although the German bazooka and the Panzerfaust have a very definite military value, they and the larger rocket weapons are now employed on such a large scale because shortages of materials, labor, and industrial facilities prevent the Germans from producing the requisite number of conventional artillery and antitank weapons.
For instance, the average anti-tank company, which formerly was armed with from 9 to 12 anti-tank guns, now has either about 3 guns and 36 bazookas, or no guns and about 54 bazookas. Probably the Panzerfaust is the most useful of these weapons, enabling the infantry squad and comparable units to stop Allied tanks.”
The Püppchen
At first glance, the 8.8 cm Raketenwerfer 43 Püppchen (“Dolly”) appears to be a tiny artillery piece. In fact, it is a development of the Panzerschreck — intended to give the anti-tank rocket launcher greater range and accuracy. The 315-pound carriage-mounted weapon used a new rocket, the RPGr4312, which replaced the Panzerschreck electrical ignition system with a percussion cap igniter.

The Püppchen was loaded through a sliding breechblock, and on firing the exhaust gases were contained within like a normal artillery piece. The barrel pivoted on a pintle which allowed for simple aiming and easy target acquisition. The carriage wheels could be removed to lower the profile, and skis could be added for transport across snow. Firing instructions were printed directly onto the gun shield.

The Püppchen offered more stability as a firing platform than the Panzerschreck, increasing accuracy and providing an effective range of approximately 500 meters (and a max range of 750 meters). However, there was nothing that could be done about the dramatic firing signature of the rocket launcher. It was unlikely that a Püppchen crew could get off more than a couple of shots before they were observed, and targeted or overrun.

Recently, The Armory Life managing editor Richard Johnson and I were reviewing some film of Volkssturm defenders in Konigsberg during early 1945. In scenes of the Püppchen firing, we noticed considerable jump each time a rocket was launched. These weapons are normally described as “recoilless”, which seems a bit generous. The gunner would still need to re-lay the gun on target after each shot.

The Püppchen‘s small carriage was not suited to be towed by normal vehicles, but rather by horse teams or an ultra-light tractor like the Kettenkrad. The US “Intelligence Bulletin” reported on the Püppchen in the November 1944 issue:

“The Püppchen, a carriage-mounted rocket launcher with breechblock also fires the 88-mm rocket. Although the Püppchen has wheels, the gun can be fired from little sleighs to achieve a very low silhouette. While the Püppchen has a range of 770 yards, it is very lightly built and is likely to smash up when towed by motor vehicles.”
Other than the wheeled carriage, the Püppchen could be equipped with skis for use in the snow. A US Ordnance report from March 1945 described the use of skis: “Ski mounts, instead of the conventional wheels, have been found mounted on the 8.8cm Raketenwerfer 43, which bears the nickname “Püppchen”.
Due to the fact that the Püppchen is designed for rapid wheel disassembly, the changeover from wheels to skis can be accomplished in approximately thirty seconds. An iron ring is attached at each end of the skis for the attachment of towing ropes.”

The report also notes that the skis were 54 inches long and 7.5 inches wide. A significant advantage of operating the Püppchen without its wheels was the extremely low profile of the weapon — just 2 feet 11 inches high.
As the Püppchen’s barrel pivoted on a pintle, much like a machine gun on a tripod, this gave a gunner with steely nerves a good opportunity to get a first shot-kill from a well-sited ambush position.
US Ordnance Description
“This weapon is a closed breech rocket launcher which fires a rocket projectile. It is transported on a two-wheeled carriage and may be fired from the carriage or from firing segments to lower the silhouette. If necessary, it may be readily disassembled into seven loads for transport. A cone-shaped gas deflector is fitted over but does not protrude beyond the muzzle.
The piece is aimed by grasping two handles fitted to the left rear of the cradle and aligning the open sights on the target. The rear sight is adjustable from 180 to 700 meters. The launcher fires from a closed breech which is operated by a handle on top of the breech ring.
Opening of the breech cocks the hammer which is held in firing position by a sear. When the projectile has been inserted and the breech closed, a squeeze of the right handle depresses the sear, releasing the hammer.
A safety device fitted to the left of the firing pin in the center of the breechblock must be turned to “F” position before the launcher can be fired. An additional safety feature prevents the hammer from striking the firing pin unless the breech is fully closed.
The small shock of recoil developed by the rocket gases against the closed breech is transmitted directly to the spade. Ammunition used with the rocket launcher is a modified version of the 8.8 cm rocket projectile, having a percussion primer instead of the electric type.
The rocket is fitted with a base plate with a protruding rim to seat the round in the tube. The base plate and primer are the only parts of the round which are extracted after firing.”

A March 1945 “Intelligence Bulletin” report on German rocket weapons included the following details on the use of the Püppchen:
The Püppchen (“Dolly”), a carriage-mounted rocket launcher with breechblock, fires the same 88-mm rocket that is used with the Ofenrohr. The breech prevents any flash to the rear while firing is in progress. To lower the Püppchen silhouette, the wheels may be removed and the piece left standing on two sled like rests.
In preliminary positions the ground is dug out so that the horizontal section of the lower carriage and trail will lie below the surface. For an all-around prepared position, circular trenches with an inner radius of about 2 feet are prepared.
The barrel is left just clear of cover, as is done in the case of the preliminary positions. The lower carriage is dug in and the trail wedged, so that the piece can be fired at an angle of 180 degrees. Positions are prepared in defilade or on reverse slopes and are well camouflaged.
In general, enemy doctrine governing the preparation of positions and the conduct of fire is similar to that for the Ofenrohr, except that only two projectors of the Püppchen type are considered necessary for satisfactory interlocking fire.
The maximum effective range of the Püppchen is considered to be 220 yards, although badly dispersed fire up to 275 yards is possible. For this reason, the Püppchen, like the Ofenrohr, is employed in the foremost infantry positions.
For added protection from artillery fire, the launcher may be detached from its carriage and removed to a shelter some distance away from the prepared position.
Alternate positions are prepared only when the terrain restricts the field of fire and provides good cover for the maneuvering piece. In such terrain each position is constructed so that the Püppchen can be run in and out on wheels.
Since the Püppchen is harder to conceal than the Ofenrohr, the Germans believe that it is necessary to furnish the larger weapon with antitank protection in the form of obstacles, natural or artificial, supplemented by mines.
Because the Püppchen’s carriage is not strong enough to stand up under motor towing at high speed, and since horse-draft sacrifices valuable time and involves the problem of replacing animal casualties, the Püppchen generally is transported on trucks and is used only in positional warfare.
The 88-mm rocket used in both the Ofenrohr and the Püppchen is heavy enough to cause ammunition-supply difficulties in battle. (A box of three rounds weighs 24 pounds.) This is why the Germans try to build up supplies in all main and alternate positions.”

Conclusion
At this stage of the war, the die was cast for Nazi Germany — it was unfortunately a matter of how many lives would have to be spent for them to realize it. Was the 8.8 cm Raketenwerfer 43 Püppchen a sound design? By the standards and situation the Germans faced that time, most certainly.
Could it stem the tide of Allied armor bearing down on the Reich? Clearly, no.

The CZ have announced that the Bundeswehr has selected the CZ P-10C OR FDE as the P13. The P13 will replace the P8A1, the Heckler & Koch USP, which entered service in 1994. CZ have described the selection as “one of the most significant milestones in its history.”
The P-10C is a striker-fired, short recoil, tilting barrel actioned service pistol, chambered in 9×19 with a standard magazine capacity of 15 rounds.
Introduced by CZ in 2017, the pistol has a 102mm (4in) barrel and an overall length of 187mm (7.4in). Unloaded, the pistol weighs in at 740g (26 ounces). The P-10C is already in service with the armed forces of the Czech Republic, having been adopted in 2020.
Jan Zajic, CZ CEO, told TFB that the new pistols “will be delivered in a configuration tailored to the Bundeswehr’s specific requirements and manufactured and tested in accordance with military specifications.” The P13 will have a flat dark earth finish and its slide will be cut ready for an optic.
The Bundeswehr has not yet announced if the pistols will be generally issued with a red dot sight as standard and if so which model of red dot will be issued. The P-10C OR reportedly beat out competition from Glock and Slovenia’s Arex.

“All the pistols for the German Bundeswehr will be produced in CZ’s production facility located in Uherský Brod, Czech Republic, which meets stringent quality and compliance standards.
We maintain sufficient manufacturing processes and capacity to serve military and law enforcement as well as commercial customers worldwide”, explained Zajic.
While local production of the pistols wasn’t a criterion in the Bundeswehr’s tender CZ noted that they will work closely with their partner in Germany, POL-TEC GmbH & Co., to fulfil the contract and provide comprehensive support to the Bundeswehr.

The quantity of pistols to be procured has not yet been announced by the German government but the order is expected to be significant, with CZ’s CEO Jan Zajic telling TFB that:
“We are honored that the German Bundeswehr has chosen CZ as its partner. Our success in this rearmament tender is one of the most significant achievements in CZ’s modern history.
It clearly confirms the outstanding reputation our firearms have earned through active deployment in real combat conditions. We look forward to a long-term cooperation with the Bundeswehr and to fulfilling all its requirements in line with the contract.”

Its a Interstate Arms Corps Model Hawk in 12 GA


Boss & Co is London’s oldest gunmaker, a company that has remained in privately-owned operation since being established. Whether you are a seasoned shooter, an owner or an enthusiast, this insight into Boss & Co history will tell the story of the innovators and craftsmen who made the company what it is today.
Boss. A family name synonymous with fine gunmaking.
The Boss family originated from Leicestershire and had no roots in gunmaking when William Boss began an apprenticeship in 1773, aged just 15. His commitment to becoming a gunmaker was clear, and he moved away from his family to Birmingham to be closer to his mentor, gun and pistol maker Thomas Ketland.
Excelling at his craft, and already making a name for himself, William Boss then moved to London where the finest guns were being produced. There he could further refine his skills and become a part of the dominating London gun industry.
Soon he found a new mentor: Joseph Manton. He was a leader in his field and a man who only employed top-rate journeymen which, by this time, William was.
Staying with Manton for a number of years, William fathered three sons during his time with the firm, each of whom became an apprentice to their father. Sadly, while teaching his youngest son Thomas the art of gunmaking, William died. At this time, the death of a gunmaking father marked the end of any apprenticeship for his remaining sons. But Manton made an exception for the 19-year-old Thomas and allowed him to continue with the firm as his natural talent for the craft was clear.
Little did anyone know that by allowing Thomas Boss to continue his apprenticeship, it would be the start of a story that would secure the Boss family name at the very heart of gunmaking for centuries to come.
1812 -1826
Building Boss & Co
Eventually Thomas established a name for himself as a top gunmaker. He worked mostly as an outworker, a position that saw him finishing guns for the best-known gunmakers of the time – something he excelled at.

In 1812 Boss & Co was born. Thomas placed adverts in newspapers addressed to gentlemen, sportsmen and others, announcing Boss & Co to the nation. These adverts promoted ‘self-acting safety guns, constructed to remove all apprehension of danger as they cannot be discharged except when held in the shooting position’. Proudly, these guns were manufactured ‘in a superior style of elegant workmanship’ by Thomas Boss of Edgware Road, London.
At this time, Thomas provided home visits to potential customers by day, and at his private home of an evening, but that was soon to change.
The making of Boss & Co
As is true of any company wanting to make a name for itself amongst established competition, Thomas Boss knew the importance of image.
As the reputation of Boss & Co grew, so did the number of customers through the door. Soon Thomas Boss sought his own apprentices and journeyman gun makers, needing up to ten skilled staff and two apprentices. Two of these new employees were nephews of Thomas Boss, men who would go on to play an important role in the future of Boss & Co as it developed.
1851 saw Boss & Co invited to participate in Prince Albert’s Great Exhibition alongside other renowned gun makers. This invitation marked the increased status of Boss & Co as one of London’s leading gun makers and to celebrate they created a special pair of dueling pistols for the event. These pistols are now back in Boss & Co ownership and form an important part of the company archive.

1857 – 1890
The Paddison Years
By now Boss & Co was a well-established, highly regarded gun maker. Their output was sought after and their order book ever-increasing.
By default, Amy, widow of Thomas, took over the business. But she had no gunmaking experience and would often seek the support and guidance of her employees to help run the company, a situation which was far from ideal for the now-famous Boss & Co.
Ageing in years, Amy turned to her nephews Edward and James Paddinson for assistance. The partnership worked well and lasted for many years up to the death of Amy in 1872. Edward and James then took over the firm as beneficiaries of her will.
The Paddinson brothers had trained and worked with Boss & Co for many years and were well-placed to continue its legacy. However, James Paddinson died just one year after taking control, leaving Edward as sole custodian.
Edward continued to produce the best quality London guns for the next 17-years, with high quality continuing to take focus over innovation and evolution. In 1890, ill health and personal financial concerns prompted him to seek a partner, and he welcomed John Robertson to the fold.
Robertson has long-supplied skilled work to Boss & Co and, having had first-hand experience of his work, Paddison had little hesitation in offering Robertson a half-share in the company.
The Robertson Era
The Robertson-Paddinson partnership would last just one year before Edward succumbed to illness and died.
Upon the death of Paddison in 1891 his half share passed to a nephew who had little interest in anything other than drawing his share of the profits. Eventually, in 1893, Robertson bought out the other half share and became the sole owner of Boss & Co, having had to re-mortgage his home to release the required funds. The company was now, finally, under his sole control.
The Robertson era of Boss & Co was, to date, probably the most important period in the history of the company. It was a time when the company became known for quality, beauty and innovation and was a development which led to the Boss & Co name being revered around the world.
There is much to celebrate with Robertson, as he can be thanked for important innovations such as the Boss Single-Trigger, the Boss Ejector and the Boss Over and Under, each of such huge importance to Boss & Co, and the gun trade as we know it today. Such is the importance of the innovations of the Robertson era, a detailed account of each can be found here.

Another Boss & Co trademark that can be attributed to this period is Boss Rose and Scroll engraving. The Rose and Scroll design, introduced by Robertson, was the creation of an engraver named John Sumner, the third of four generations of engravers who all worked on Boss & Co guns. Again, we can attribute this era for creating one of the most recognizable elements of a Boss & Co, and one that remains a popular choice of finish to this day.
Robertson is a man who continues to be held in high regard, quoted as making the last significant changes to sporting guns, and shaping the way Boss & Co would be known for generations to come.
The Young Governors – The End of The Robertson Line
1917 saw the death of John Robertson, and Boss & Co was passed to the very capable hands of his three sons John, Sam and Bob, known in the industry as ‘The Young Governors’. The 1930s proved to be a tough time for gunmakers, but the young trio ran the firm with efficiency and continued to produce guns to a high standard for a discerning clientele.
By 1951 the last of the Young Governors died, but for many years thereafter the firm would still include a descendant of John Robertson amongst its ranks. It was as late as 1999 when the last Robertson left Boss & Co and so ended a family connection that had lasted for 109 years.
Boss & Co Today
Boss & Co continues today in private ownership as it always has since its founding in 1812, as London’s oldest gun company. Today it is owned by Arthur DeMoulas a man with a long-standing knowledge of, and appreciation for, the company, our heritage and guns.
He understood the importance of private ownership, a fact which has enabled Boss & Co to continue to focus on building “Best Guns Only” and lead the revered ‘holy-trinity’ of London gunmakers, unencumbered by the distractions of diversification, that can arise from being part of a large luxury lifestyle brand conglomerate.
In fact, the first decision that Arthur communicated to the workforce on buying the company was that Boss & Co would continue to make “Best Guns Only” by hand, using traditional methods. Second grade and machine made guns would never be built at the company.
Since then under his leadership, the company has invested in the London workshop, has helped to secure key suppliers and set up an apprenticeship scheme to train and pass on the skills to a new generation of Boss & Co London gunmakers.
With full workbenches and an extended team of master craftsman, the next stage of Arthur’s vision was set in motion revitalising the excitement for innovation that was seen at Boss & Co during the late 1800s and early 1900s, when our company led the gun making world with new inventions, design and style.
Work is now underway to re-introduce unique Boss & Co products not seen for over 100 years, providing continuity with the most celebrated periods in our history under the stewardship of our forefathers such as John Robertson and Thomas Boss.
For Arthur, he simply sees himself as a custodian and trustee of the company in the continuum of the storied history of one of the most famous gun companies in the world. His enthusiasm, investment, drive, knowledge and respect for the company and passion will continue to set Boss & Co apart as the gun makers and builder of “Best Guns Only”.