Category: All About Guns
Categories
Airsoft
The S&W model 15 is one of the most iconic pistols and easily recognizable revolvers on the market today.
There are few guns you can spot across the room. This piece should do well as an informal target revolver and would do just as well for duty or personal protection.
Though some may knock the power of .38 special, it served in both world wars and in countless law enforcement offices for many a decade.
***Warning Do not Do this at Home Folks!***
Now this is what I call a real Fancy BBQ Gun!
.256 Newton
| .256 Newton | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | Hunting | |||||||||||
| Place of origin | United States | |||||||||||
| Production history | ||||||||||||
| Designer | Charles Newton | |||||||||||
| Designed | 1913 | |||||||||||
| Manufacturer | Western Cartridge Company | |||||||||||
| Specifications | ||||||||||||
| Parent case | .30-06 Springfield | |||||||||||
| Case type | Rimless | |||||||||||
| Bullet diameter | .264 in (6.7 mm) | |||||||||||
| Neck diameter | .291 in (7.4 mm) | |||||||||||
| Shoulder diameter | .418 in (10.6 mm) | |||||||||||
| Base diameter | .471 in (12.0 mm) | |||||||||||
| Rim diameter | .473 in (12.0 mm) | |||||||||||
| Rim thickness | .049 in (1.2 mm) | |||||||||||
| Case length | 2.440 in (62.0 mm) | |||||||||||
| Overall length | 3.40 in (86 mm) | |||||||||||
| Rifling twist | 1 in 10″ | |||||||||||
| Primer type | large rifle | |||||||||||
| Ballistic performance | ||||||||||||
|
||||||||||||
| Source(s): Newton Arms Company Catalog. 14th edition, 1920. IN Barnes, Frank C. “Cartridges of the World” Digest Books Inc., 1972. | ||||||||||||
The .256 Newton is a high-velocity rimless cartridge and was developed by Charles Newton in 1913 in conjunction with the Western Cartridge Company.
It is a 30-06 Springfield cartridge, shortened[1] and necked down to .264, with a different shoulder angle. However, the .256 Newton and the .30-06 are not interchangeable. The .256 Newton and the 6.5-06 are not interchangeable.
References
- Jump up^ Barnes, Frank, and Amber, John T. Cartridgs of the World (DBI,
Categories
Colt, Model 1883 Colt-Burgess
Although Colt predominately was a manufacturer of popular revolvers, such as the Colt Single Action Army, the company began in the 1880s to seek to compete against Winchester in the rifle market. In 1882, Colt contacted Andrew Burgess to design a lever-action rifle and by July 1883, production of the new rifle had begun. The Colt-Burgess was produced for sixteen months thereafter, with a total of 6,403 guns manufactured. Approximately 60% of these were of the rifle variation. When compared to production figures of Winchester’s 1873 rifle, the Colt-Burgess failed as a serious competitor to Winchester. From 1873 to 1919, Winchester manufactured 720,610 Model 1873 rifles, or an average of over 15,000 per year.
The short production history of the Colt-Burgess has led to much speculation as to the reason of its demise. According to legend, upon hearing of Colt’s entrance into the lever-action rifle market, Winchester began to develop a prototype revolver to compete with Colt’s market. A “gentleman’s agreement” then followed between Colt and Winchester, with Colt agreeing to drop production of the Burgess and Winchester abandoning its plans to develop a revolver. The truth of this story has never been fully verified, and as such, the reason for the Burgess rifle’s short production history is unknown.