All About Guns

Remington XP-100

Image result for Remington XP-100
Amazingly enough, I am old enough to remember. When this gun came out and saw one at a Gun Shop in Pasadena back in the late 60’s.Image result for Remington XP-100 ammo
I also remember that I thought that it was & still is. One of the strangest gun that I have ever seen.Image result for Remington XP-100 ammo
Little did I know that this was the start of the Bullpup system and the rise of plastic in the world of guns.
I have also been told reliably that it’s a very accurate piece. Which in turn allowed the growth of large game hunting.Image result for Remington XP-100 ammo
Image result for Remington XP-100 hunting
Here is some more information about this pistol.
Image result for Remington XP-100 ammo



I also found this very strange video at 46 min. you judge  also
The Remington XP-100 (from experimental Pistol number 100) is a bolt-action pistol produced by Remington Arms from 1963 to 1998. The XP-100 was one of the first handguns designed for long-range shooting, and introduced the .221 Remington Fireball (often called .221 Fireball). The XP-100 was noted for its accuracy and is still competitive today in the sport of handgun varminting, which it helped create.[1]


The XP-100 was based on Remington’s short action bolt action carbine, the Remington Model 40X, which influenced the later Remington Model 600 rifle.[2] The XP-100 was initially introduced with a 10¾” barrel set into a nylon stock with an unusual center-mounted grip. Chambered in .222 Remington in early prototypes, the short barrel produced significant noise and muzzle flash. Subsequently the case was shortened to reduce powder capacity to a volume more suited to the shorter barrel of a pistol. The resulting cartridge, the .221 Fireball, produced factory loaded velocities of over 825 m/s (2,700 ft/s) from the short barrel, and accuracy rivaling the parent .222 Remington, one of the most accurate cartridges made.[1]
All but the XP-100R model were single-shot designs, while the XP-100R had a small internal magazine (holding four rounds), similar to most bolt-action rifles. The R model – for “repeater” – was made 1991-1997 in .223 Rem., .250 Savage7mm-08 Rem..308 Win..35 Rem., and 350 Rem. Mag. It was reintroduced in 1998, this time without sights, in .223 Rem., .22-250 Rem..260 Rem., and .35 Rem.[2]

Model history[edit]

The XP-100 went through a number of changes during its production run, and many variations were only available through the Remington Custom shop. The most significant changes in the later versions were to barrel length, which went to 14½”, and the grip location, which was moved to the rear of the stock. The calibers changed; with the elimination of the original 10¾” barrel, the reduced powder capacity was no longer such a requirement, and the chamberings switched to standard commercial rifle cartridges. By the time the XP-100 was discontinued, it faced stiff competition from other bolt-action pistols such as the Savage Striker as well as the versatile Thompson Center Arms break-action Contender.[2]

Model production by year[edit]

  • XP-100 (1963–1985)
  • XP-100 Varmint Special (1986–1992)
  • XP-100 Silhouette (1980–1997)
  • XP-100 Hunter (1993–1994)
  • XP-100 Custom (1986–1997)[3]
  • XP-100R (1998)[4]
  • XR-100 (2005–Present)[5]

Caliber production by year[edit]

Current production[edit]

The XP-100 action was used as the basis for a new single-shot rifle from Remington called the XR-100 Rangemaster.[5]
While the XP-100 has disappeared from Remington’s lineup (Remington is primarily a maker of rifles and shotguns), the .221 Fireball remains in production. The Model 700 rifle has been available since 2002 in a .221 Fireball chambering; while it lacks the velocity attainable with the vastly more popular .223 Remington, the short .221 Fireball delivers most of the performance with far less noise and flash.[6]

Factory recall[edit]

XP-100 pistols and Remington Model 600 rifles were recalled in 1979 because of a safety issue. The bolt was fully locked when the safety was on, making it impossible to unload the gun. Remington made a free modification available that allowed the bolt to open while the gun was on safe, allowing it to be unloaded.[1]

Leave a Reply

Your email address will not be published. Required fields are marked *