Categories
All About Guns

Neat looking furniture on that Garand wouldn’t you say?

Categories
All About Guns Ammo Cops

NO CONTEST RURAL SHERIFF SAYS DRUGS, NOT GUNS ARE THE PROBLEM WRITTEN BY DAVE WORKMAN

Yakima County Sheriff Bob Udell, a tell-it-like-it-is veteran lawman.

Yakima County Sheriff Robert Udell is one of those rare public servants willing to speak to his constituents with the sort of candor most three-piece-suit politicians avoid like a tough interview.

Insider Online caught up with the 34-year law enforcement veteran, in his second term as the top lawman in his east-central Washington county (he ran unopposed last November), at a gathering recently during which he told the small audience that drugs, not guns — especially semi-auto rifles — are the real problem he and his colleagues face. Why liberal politicians stubbornly refuse to recognize this escapes him.

“Our liberal friends are so focused on semiautomatic firearms,” Udell said, “especially long guns of all types (which) kill so few people that, statistically — what are we, a nation of 340 million? — statistically it’s not that relevant.”

In any given year, Udell explained, there are fewer than 500 homicides reported that involve rifles.

“Every one is a tragedy,” he stressed. “If someone uses a rifle in a school shooting, that is horrific but that’s not the norm. It is so rare that any child in our school system has a greater chance of being killed in a car wreck than (by) violence in school.”

Yakima County, he said, is something of a hub for drugs and gangs. Udell said fentanyl is being trucked into his jurisdiction and it kills many times the number of people annually as firearms do. “There’s no match,” he observed, “it’s crazy.” Still, legislators seem blind to this, so they focus on restricting gun rights while going soft on drug users. That’s the difference between lawmakers and lawmen, one presumes.

“The border is nearly wide open,” Bob Udell lamented. “The fentanyl is coming up here literally in semi-trucks and it is a solid upward trend of people dying from it, and yet the same people that want to restrict our Second Amendment rights seem good with an open border and people dying.”

He estimates this year could end with at least 150 fentanyl overdose fatalities, while last year, his department investigated 37 homicides in his county, which spans more than 4,000 square miles.”

“Right now,” he said recently, “we are sitting at 20 (murders) and the vast majority are directly related to the drug culture.”

 

Sheriff Udell sometimes rides around in a rather stout 4X4 rig.
It can come in handy during the winter months.

 

While Udell says anti-gunners who support drug legalization suffer from “fuzzy thinking” (“It doesn’t make any sense at all; it’s lunacy,” he said), his own perspective is pretty clear, especially when it comes to private gun ownership. Funny how this seems to run strong in rural lawmen who support the Second Amendment.

He’s on his second SIG SAUER pistol. His current sidearm is a SIG P226 in .40 S&W. His first was a P220 in .45 ACP, essentially the same model my younger son owns. Josh came across it a few years ago at a gun show and brought it home. It’s a good shooter, and Udell gave his own P220 the same high marks.

“I still feel comfy using the 220,” he acknowledged.

He also confessed to occasionally packing a single-action sixgun on the job. However, the .40-caliber offers a few more rounds in the magazine, and the cartridge is a known fight-stopper.

 

Sheriff Udell carries his trusty SIG P226 in .40 S&W, though
he’s got a SIG P220 in .45 ACP for making bigger holes.

 

What’s on the horizon? Sheriff Udell doesn’t see a light at the end of the tunnel because the policy makers seem contentedly stuck in the dark.

“By ignoring why we have this issue (of drugs and violent crime), you’re not going to fix it,” he said.

So, like so many of his contemporaries in law enforcement — people serving in big counties or small towns — he just deals with the problem with the resources he’s got.

 

One of Dave’s favorite sixguns is this .32 H&R Magnum on a
Ruger Single Six frame with fixed sights. He’s on the hunt for a
good handload using Hornady XTP 100-grainers.

Small Caliber, Big Surprise

 

This next thing started with an email exchange I had with American Handgunner’s John Taffin back in mid-May. He’d written a piece on the .32-20, about which I complimented him because it was a good read, and the conversation reminded me I had a bunch of .32 H&R Magnum brass out in the workshop in need of reloading.

The brass had been tumbled months ago and many things got in the way of putting together fresh loads, but finally I stole part of a Sunday morning and got to work. Sometime last year, my brother found some 100-grain Hornady XTPs at a local gun shop and scooped them up. I’d been using 100-grain Speer JHPs ahead of 10.0 grains of H110, for a little more than 1,000 fps out of my Ruger fixed-sight sixgun on a Single Six frame with its 4 5/8-inch barrel.

Hornady doesn’t offer a comparable load recommendation for H110, but I did check out some interesting suggestions for other propellants including a promising one using 5.0 grains of Hodgdon’s HS-6 — the max recommended powder charge for this bullet — for a loading manual velocity of 1,000 fps.

 

The chronograph doesn’t fib. Dave’s top velocity over the screens
was noticeably less than the 1,000 fps listed in the Hornady manual,
but from a gun with a 6 ½-inch barrel. His shorter tube delivered less velocity.

 

However, my Chrony’s top recorded speed with the screens set up 3 feet ahead of the muzzle was 894.3 fps, which makes sense, since the loads listed in the Hornady manual were tested in a Ruger Single Six with a 6 ½-inch barrel. The load combination was definitely accurate at 10 yards (see the image), and good enough to put the hurt on small game at two or three times that distance.

This little reloading adventure did reveal something I’d talked about with a couple of guys at the recently revived Elmer Keith Invitational long range handgun match held this year in a large meadow several miles north of Spokane.

 

Dave discovered he had to trim his Starline .32 H&R brass to
1.065-inch, so out came the dial caliper for the final measure.

 

We were chatting about the need for precision loads in long-range shooting endeavors, and one of the guys brought up the need to trim straight-wall cases. As it happens, my empty .32 H&R brass had been reloaded a couple of times, so out came the dial calipers, set to the trim length of 1.065-inches and surprise of surprises, all but three cases needed some trimming.

 

Brass Tips

 

Not only should cases be trimmed, but our conversation also touched on the necessity to clean out the primer pockets for a snug, flush fit. I was using CCI 500 primers, with which I’ve always had very good luck, and my old Piggyback progressive press, built years ago by RCBS.

I checked the trim length after resizing, did the trim, chamfered the case mouths, and then cleaned out each primer pocket with a wire brush. I was using Starline brass, which is very good stuff, so every round was loaded as precisely as I could.

 

While he didn’t get the velocity, he did enjoy the accuracy.
Dave’s little Ruger always delivers the goods in this department.

 

For years I tumbled brass in corn cob media, but a few years ago I transitioned to wet tumbling with hot water and detergent, and thousands of tiny stainless steel pins. The result is a highly-polished case inside and out which looks just like new. I dry them in the greenhouse, where summer temperatures can reach upwards of 100-110 degrees.

So, what I had with this batch of reloads was ammunition as close to brand new as possible.

This might not seem important to casual plinkers, but for someone like me, who just might take a shot at game in the fall with a sidearm, churning out the best loads possible is important.

At the Keith shoot, I listened intently to veteran handgunner Al Fernandez about how he and his dad, Ace, used to meticulously clean and reload their brass when they first got into long-range shooting. Al’s advice would be very much like my own. Each cartridge must be loaded as carefully and consistently as possible for the best odds of connecting with the target, whatever it happens to be.

Years ago, I wrote how the bullet is the only link between you and the target. It is the bullet which seals the deal. A bullet launched from a poor platform may not make the connection, which could mean no meat in the cooler or no prize following a match, and no stories to tell back home.

That would make life pretty boring.

Categories
All About Guns

TOP 10 REVOLVER MANUFACTURERS ACCORDING TO 2021 REPORTS BY HANDGUNNER STAFF

Each year, the ATF publishes the Annual Firearms Manufacturing and Export Report (AFMER), providing detailed firearm production and export numbers for a given year.

The data is reported by federally licensed manufacturers of firearms and destructive devices (Federal Firearms License types 07 and 10), which are required to submit a production report of manufacturing and export activity to ATF by April 1 of each year.  The ATF then compiles the submitted data and releases it each January, with a one-year delay to comply with the Trade Secrets Act.

Published this year, the 2021 AFMER offers the latest publicly available data about the manufacture and export of firearms in the United States. The report is divided by firearm type, listing every manufacturer responsible for producing a single pistol, revolver, rifle, shotgun or “Misc. Firearm,” further broken down by caliber, offering a detailed look at who is producing what and how much.

 

 

According to the report, nearly 8 million handguns were produced in 2021, accounting for more than 63% of all firearms produced that year. And while 9mm pistols unsurprisingly continue to dominate the U.S. pistol landscape, an often overlooked category continues to prove detractors wrong — wheelguns.

In 2021, more than 1 million revolvers were produced in the U.S. for the first time (1,159,918), a 16.8%  increase year-over-year (from 993,078). Let’s take a look at the top 10 revolver manufacturers of 2021 who helped make the milestone achievement possible.

 

10. Nighthawk Custom

 

After dropping out of the top 10 in 2020, Nighthawk Custom is back to round out the list for 2021.

In 2016, Nighthawk Custom partnered with legendary German firearm manufacturer Korth to develop and import their high-end revolvers. in a review of the Mongoose Carry Special and Heritage models Roy Huntington wrote, “Nighthawk Custom’s collaboration with the German makers of the astounding Korth revolver series has helped serve to rewrite expectations on what a revolver can — or might — be.”

Total Revolvers: 1,110
2020 Rank: #11 (799)

 

9. Magnum Research, Inc.

 

The embodiment of “bigger is better,” Magnum Research is best known for the Desert Eagle but has also become popular for the BFR, or Biggest Finest Revolver.

Offered in 10 pistol (short cylinder) and rifle (long cylinder) calibers, as well as barrel lengths ranging from 5”–10”, MRI produced 1,833 revolvers in 2021, including over 1,000 chambered to .50.

Total Revolvers: 1,833
2020 Rank: #9 (1,665)

 

 

Magnum Research’s BFR Keith commemorative chambered in .500 Linebaugh.
Photo by Jeff “Tank” Hoover

8. Automated Finishing Co. Inc.

 

Automated Finishing Co. Inc. more than doubled its production in 2021, moving up two positions to #8. Not bad for a company that started out as a hand engraving company in the 1940s.

Total Revolvers: 2,053
2020 Rank: #10 (867)

 

7. Standard Mfg. Co.

 

Although Standard Mfg. Co. produced slightly fewer revolvers in 2021 than the year prior, the company managed to hold onto its #7 spot on the list.

Total Revolvers: 16,975
2020 Rank: #7 (17,254)

 

6. Kimber Mfg. Inc.

 

Moving up two positions from the previous year, Kimber Mfg. slides into #6 with 16,975 revolvers produced in 2021.

This was the year Kimber released the K6xs, a smaller, lighter-weight version of its K6s. Built specifically for concealed carry, the K6sx is chambered in .38 SPL +P.

Total Revolvers: 16,975
2020 Rank: #8 (12,622)

 

5. North American Arms Inc.

 

When it comes to pocket pistols, they don’t get any smaller than North American Arms. While NAA produces semi-auto pistols in .32 and .380 calibers, they specialize in rimfire mini-revolvers.

A bit of history …

In the 1980s, Dick Casull (of .454 Casull fame) owned Rocky Mountain Arms, which later became North American Arms.

After several years, he and his then partner, Wayne Baker, “sold” NAA to Frank Talley of Talley Manufacturing and moved to Freedom, Wyo. to reengineer NAA’s line of mini-revolvers and large-frame single-action revolvers. NAA’s version was chambered in 45 Long Colt/450 Magnum Express, while the new Freedom Arms’ models were chambered in the eponymous 454 Casull.

After both companies manufactured both product lines for several years, NAA discontinued manufacturing of the large revolver, and Freedom discontinued producing the mini-revolvers.

Today, NAA is known for its mini-revolvers, while Freedom Arms, which ranks 12th on this list, is known for its big bores.

Total Revolvers: 57,142
2020 Rank: #4 (50,562)

 

4. Colt’s Mfg. Co.

 

Colt’s Mfg. Co. moved up one spot in 2021 to #4 on the list with 65,062 total revolvers produced.

In 2021, Colt brought back the Python in stainless steel. Available in three barrel lengths, it’s available chambered in .357 Magnum and also accommodates .38 Special cartridges. In the same year, Colt also released the Anaconda in .44 Magnum.

Total Revolvers: 65,062
2020 Rank: #5 (333,539)

 

3. Smith & Wesson Inc.

 

Smith & Wesson Inc. was the top overall producer and top handgun producer in 2021. Despite a year-over-year decrease in revolver production, the company managed to hold onto its top three spot in the category.

The majority of the company’s revolver production was in the “to .38” grouping (63.6%).

Total Revolvers: 232,476
2020 Rank: #3 (267,468)

 

2. Sturm, Ruger & Co. Inc.

 

Sturm, Ruger & Co. Inc. was the only manufacturer in 2021’s top 10 who produced revolvers in all six caliber groupings.

Producing 276,999 total revolvers, 209,845 (%) were chambered in .22 caliber, 35,759 (%) in .357 and 19,409 (%) in .38.

Total Revolvers: 276,999
2020 Rank: #2 (269,160)

 

1. Heritage Mfg. Inc.

 

Heritage Mfg. dominated the revolver category, producing 42% of all U.S.-made revolvers in 2021. The company has been the top producer of revolvers since 2019.

There were 781,246 .22-caliber revolvers produced in 2021, of which 491,822 (63%) were produced by Heritage Mfg.

Total Revolvers: 492,584
2020 Rank: #1 (306,159)

 

 

While this article only focused on the production of revolvers, our sister publication, Shooting Industry, published a full breakdown of the 2021 AFMER in their July 2023 issue.

Categories
All About Guns

Slovenian Modularity: Perun X16 “PDW” in .300 Blackout

Categories
This great Nation & Its People War

Sisters’ Grandfather Was a Soldier in American Revolutionary War

Categories
War

Before The Storm: The Early Days Of The Vietnam War | Battlezone | War Stories

Categories
N.S.F.W. You have to be kidding, right!?!

While we sweat it out, the good news is that its only 163 more days until Christmas! NSFW

Categories
Soldiering This great Nation & Its People War

Ike said this was his favorite part of being President

Categories
Uncategorized

Smith & Wesson Releases New M&P22 MAGNUM Pistol in 22 WMR by NEWS WIRE

A solo shot of the M&P22 MAGNUM pistol.
(Photo: Smith & Wesson)


SPRINGFIELD, MA.
, (7/11/2023) – Smith & Wesson Brands, Inc. (NASDAQ Global Select: SWBI), a leader in firearm manufacturing and design, today announces the release of the new M&P22 MAGNUM pistol, chambered in 22 WMR.

This latest addition to the M&P series is all about bringing more. More capacity, more reliability, and more features. Its internal hammer-fired design, paired with the TEMPO gas-operated barrel system, keeps components locked in place until the bullet passes the gas port, increasing performance.

With a staggering 30-round capacity, the full-size polymer frame M&P22 MAGNUM ships with two magazines so you can spend less time reloading and more time training. It comes with a fiber optic front sight, black notched rear sight, and is optics-ready, allowing you to direct-mount most of the popular micro red dots available today.

Features

  • Internal hammer-fired, gas-operated, locked-breech TEMPO™ barrel system (barrel doesn’t cam open until bullet passes gas port).
  • Fiber optic (green) front sight with black notched rear sight
  • Slim, textured grip.
  • Ambidextrous Slide Stop and Manual Thumb Safety
  • Flat-face trigger for consistent finger placement allows for more accurate and repeatable shooting.
  • Picatinny-style rails
  • Made in U.S.A
The M&P22 MAGNUM pistol in a hand.
(Photo: Smith & Wesson)

“The M&P22 MAGNUM combines the best features of our internal hammer fire control system with the patented TEMPO barrel design, creating a smooth operating experience for the shooter.

The 22 WMR is a versatile and field-savvy cartridge that has been a legacy among American shooters, hunters, and trappers for decades. Smith & Wesson is proud to offer a new pistol that further supports the use of this cartridge outdoors or on the range,” said John Myles, Senior Manager of New Products.

Specs:

  • WIDTH 1.13 in
  • LENGTH 8.4 in
  • HEIGHT 5.9 in
  • WEIGHT 22 oz
  • CALIBER 22 WMR
  • SIZE FULL
  • CAPACITY 30
  • ACTION INTERNAL HAMMER FIRED
  • BARREL LENGTH 4.35
  • GRIP POLYMER
  • SIGHTS FIBER OPTIC
  • OPTIC READY YES
  • SAFETY THUMB SAFETY
  • COLOR/FINISH BLACK
  • STATE COMPLIANCE N/A
  • THREADED BARREL NO
  • FRAME POLYMER
  • LASER NO
  • PERFORMANCE CENTER NO
  • NUMBER OF MAGAZINES 2
  • 10LB TRIGGER NO
  • BARREL MATERIAL STAINLESS STEEL

The M&P22 MAGNUM is fully ambidextrous, has a 4.35-inch stainless steel barrel with Armornite® finish, includes a flat-face trigger, and Picatinny-style rail for mounting accessories.

This pistol is proudly made in the U.S.A. and has an MSRP of $649.00. To learn more, visit smith-wesson.com.

*** Buy and Sell on GunsAmerica! All Local 

Categories
All About Guns

How Lever Action Rifles Are Made! | How It’s Made | Science Channel